Products - GPM32F0114A



GPM32F0114A Copy Link.


ROM TypeWorking Voltage(V)Speed(MHz)ROM(Byte)RAM(Byte)ADC(12bit)Motor BLDCMotor Sensor-lessMotor SINTMR/CNTCPU OSC. INTCPU OSC. X'TALOP / ComparatorPWMMDU/CORDICLVRIO No.UART/SPI/12CPreDriver for SOCPKG
Flash2.4~5.58032K8K/2K16-ch/2setVVV4V-3/210VV382/2/1-LQFP48



General Description

GPM32F0114A series of industrial microcontrollers are based on the ARM® Cortex®-M0 processor core and operate at a frequency of up to 80MHz.  GPM32F0114A series are optimized for motor control, power conversion, home appliances and general purpose applications.  GPM32F011xA series is capable of operating at temperature from -40°C to 105°C and working voltage from 2.4V to 5.5V.


Features

  • CPU Subsystem
    • CPU Core
      • ARM® Cortex®-M0 32-bit CPU (80MHz max) with Code Fetch Accelerator
      • Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
      • 24-bit SysTick timer
      • Single cycle 32bit multiplier instruction
    • MATH Co-processor (MATH)
      • 24-bit trigonometric calculation (CORDIC)
      • Hardware Divider
  • Memories
    • 8K bytes SRAM
    • 4K bytes System Memory for loader
    • Up to 64K bytes (max) Program Memory
      • Configurable Data Memory shared with program memory
  • Clock Management
    • Internal oscillator: 8MHz±5% @ 2.4V~5.5V with -40°C to 105°C
    • Internal oscillator: 32KHz±50%
    • External crystal oscillator : 4MHz ~ 12MHz
    • Phase Lock Loop : 80MHz(max)
      • The PLL output frequency based on M/N Coefficient
  • Power Management
    • In SLEEP mode: Only the CPU stopped.
    • In DEEPSLEEP mode: All clocks are stopped.
  • Reset Management
    • Power On Reset (PORRESETn)
    • PAD Reset (PADRESETn)
    • Master Reset (MRESETn)
    • System Reset (SRESETn)
  • Analog peripherals
    • Up to 2 A/D Converters with 1M SPS and 16 analog inputs
    • Up to 4 fast Analog Comparators (ACMP)
    • Up to 3 Operational Amplifier (OPA) with Unity gain frequency 20 MHz
    • Regulator with configurable output voltage (2.9V, 3.1V, 3.3V, 3.5V)
    • Temperature Sensor
    • Low Voltage Reset (2.2V, 2.7V, 3.2V, 4.2V)
    • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
  • Industrial Control Peripherals
    • Up to 2 Capture/Compare Units 4 (CCU4)
    • Up to 2 Capture/Compare Units 8 (CCU8)
    • Up to 2 Position Interfaces (POSIF)
  • System Control
    • Up to 3 channels DMA controller
    • Watchdog Timer (WDG) for safety sensitive applications
    • System Management Unit (SMU) for system configuration and control
    • 96-bit Unique ID
  • I/O Ports
    • Max 55 multifunction bi-directional I/Os
      • Each incorporate with pull-up resistor, pull-down resistor, output high, output low or floating input, depending on programmer’s settings on the corresponding registers
    • I/O ports with 15mA/20mA source/sink current
  • Timer
    • Up to 2 16bit general timer
  • Communication peripherals
    • Up to 2 I2C
    • Up to 2 SPI
    • Up to 3 UART
  • Debug System
    • ARM serial wire debug (SWD)
    • Supporting up to 4 hardware breakpoints
    • Supporting up to 2 watch points
  • Operation Temperature
    • -40°C to 105°C
  • Reliability
    • ESD HBM 4KV
    • CDM 500V
    • EFT 4KV
  • Package
    • LQFP48
    • LQFP64

 

Please input the answer before download.