The Generalplus GPL162002A1 is highly integrated system-on-a chip and targets a cost-effective, high performance micro-controller solution for general-purpose applications. It embedded µ’nSP® 2.0 (16-bit CPU developed by Sunplus Technology), 7-band EQ, 3D surround, UART/IrDA interface, four channel DMA controller, ROM/SRAM/NOR FLASH/NAND FLASH with ECC Memory controller, six-channel 16-bit timers, SD/MMC memory interface, USB mini-host/device, gray/color STN-LCD and TFT-LCD interface, interrupt controller, SPI master/slave controller, I2C master/slave controller, Key scan, Generalplus IO, programmable I/O ports, 16-bits DAC/ADC for audio playback/recode, stereo headphone amplifier, 10 bits ADC for touch panel, PLL, and embedded 30K*16 bits SRAM and 128K*16 ROM.

By providing a complete set of common system peripherals, the Generalplus GPL162002A1 chip minimizes overall system costs and eliminates the need to configure additional components. The GPL162002A1 provides not only the high-speed performance and low cost for a system, but it also integrates several powerful tools into the development system, such as development system with C language, assembly compiler, linker, source debugger functions and project management tools.

• µ’nSP® 2.0 16-bit CPU with frequency up to 96MHz.
• 30k*16 bits SRAM for programming or LCD frame buffers.
• 128K*16 bits ROM for embedded algorithm.
• Programmable 7-band EQ.
• Programmable 3D surround effecter.
• Static memory controller. (ROM/SRAM/NOR FLASH /NAND FLASH with ECC/checksum)
• Four-channel DMA controller.
• STN-LCD controller which can support gray scale and color STN panel.
• TFT-LCD controller which can RGB(5-6-5), serial delta RGB, serial stripe RGB, serial YUV, serial YCbCr, and CCIR656.
• 4 PIP and scroll function is supported by TFT controller.
• Thirty sources Interrupt Controller.
• Universal Serial Bus (USB) 2.0 full speed compliant device and USB mini-host with built-in transceiver.
• Watch-dog timer.
• Real-time clock.
• Six 16-bits timer.
• SD/MMC memory interface.
• SPI master/slave interface.
• IIC Interface.
• Serial IO interface.
• UART (asynchronous serial I/O) or IrDA interface.
• 64 Programmable general I/O ports (GPIO) with pull-high/low control.
• Key scan controller.
• IIS output function which can be used for external DAC.
• Power manager.
• 3.0V to 1.8V Regulator.
• Low voltage reset.
• USB transceiver.
• High speed and low speed PLL.
• 16-bits stereo DAC for audio playback.
• Stereo headphone amplifier.
• 16-bits stereo ADC for voice recording.
• 10-bits ADC with 4 line-in, and touch-panel input.