Products - GPC22P120A

General Description

GPC22P120A is embedded with an 8-bit processor, 512KB OTP, 256B SRAM, three 12-bit timers, 16 general I/Os, one pure input port, and one 12-bit current DAC.  For audio processing, two channels of speech or two tone generators can be used through register configuration.  GPC22P120A is designed to operate over a wide voltage range from 2.0V to 5.5V with Low Voltage Reset capability.  In addition, GPC22P120A features a sleep mode to save more power and extend the battery life of the system.  It can be awakened from sleep mode by interrupt sources or IO’s state change.  A Serial Peripheral Interface (SPI) controller is also featured in GPC22P120A to communicate with other devices or components.

Features

• 8-bit micro-processor
• 256-byte SRAM
• Operating voltage: 2.0V – 5.5V
• CPU operating speed : 8.0MHz (Fosc=16MHz)
• Two wakeup sources
• Nine IRQs & one NMI Interrupts
• Internal regulator to supply core power
• Two software channels with noise filter to play high quality audio
• Low Voltage Reset (LVR)
• Active Battery Voltage Detection (BVD)
• Peripherals
• 16 general I/O ports
• One pure input port
• 8 general I/O pins support high sink current
• Key wakeup/interrupt function
• Built-in 32.768KHz oscillator circuit for real time clock function (X’tal)
• R-oscillator (external resistor required) or internal R-oscillator for system operating clock (12MHZ or 16MHZ)
• Internal time base generator
• Three 12-bit timer/counter, TMA with capture function
• Watchdog function
  • 14-bit PWM driver for driving speaker directly
  • One 12-bit current DAC
  • IR output
  • Up to 8 hardware PWMIOs
  • One SPI serial interface I/Os
• Sleep mode to reduce power