GPCD6L106A 
| Working Voltage (V) | Max.CPU Speed (MHz) | ROM (Byte) | RAM (Byte) | I/O | Audio Output (PWM) | Max. H/W MIDI (CH) (SPU) | Max. S/W Speech (CH) (16bit PCM) | CPU CLK OSC. ROSC | CPU CLK OSC. X'TAL | IR (Tx, Rx) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1-battery1.0V~1.8V 2-battery1.3V~3.6V | 8.0 | 320K | 512 | 20 | 1 | 4 | 2 | V | V | V |
General Description
The GPCD6L106A features a 320KB internal ROM, 512-byte working SRAM, three 12-bit timers, 20 general I/Os with multi-channel input and one 14-bit DAC with amplifier. In audio processing, melody and speech can be mixed into one output and it is featured a maximum of two sets of software channels and a high performance SPU voice engine to perform high quality voice function with ADPCM/PCM data. To save more power in the device, GPCD6L106A features a sleep mode to make CPU enter sleep state while not is use. Although in power saving mode, it is able to wake up rapidly if any interrupt source or wakeup IO is triggered. A Serial Peripheral Interface (SPI) controller helps GPCD6L106A to communicate with other devices and components easily and efficiently.
Features
- Input Voltage: 1.0V ~ 3.6V
- Programmable pumped voltage:
(supports up to two sets of DC-DC booster circuits)- One-battery option: 3.3V ~ 4.2V
- Two-battery option: 3.3V ~ 4.5V
- CPU speed: Max. 8MHz
- FOSC = Max. 16MHz (2 x CPU clock)
- ROM size: Max. 320K bytes
- RAM size: Max. 512 bytes
- Three 12-bit timer/counter, TMA with capture and comparison function, TMB/ TMC with comparison function only
(Programmable and Auto Reload) - Clock sources include external ROSC, internal ROSC or XTAL (option)
- Sleep mode to reduce power consumption
- Key change wakeup function
- IRQs & NMI interrupts
- Watchdog function (option)
- 3.0V/3.3V regulator output (option)
- Low Voltage Reset
- 20-bit programmable general I/Os
- Eight I/Os with high sink current for LED application
- All general IOs with 1M pull-low function to prevent current leakage from false key touch
- One 14-bit DAC with amplifier for direct drive speaker
- SPU (Sound Processing Unit) engine outputs audio data with 14-bit resolution to perform high quality voice/melody
- IR PWM Output
- Hardware PWMIO supports four LED outputs with 256-level brightness control
- Real-time clock
- 4-channel SPU engine with ADPCM/PCM wavetable
- Maximum two sets of 14-bit software channel with noise filter to play high quality sound
- SPI master interface
- Built-in Battery Voltage Detection (BVD) / Low Voltage Detection (LVD) function
Data Sheet
GPCD6L106AV10_ds.pdf
Confirmation Sheet
GPCD3L_6L_9L_SeriesV10_cm(epdf).pdf