Products - GPCD9002A

General Description

GPCD9002A is ROMless and workable up to 4M bytes external ROM, 512 bytes working SRAM, three sets of 12-bit timers, 32 general I/Os, one 10-bit ADC with 8 channels input and one 14-bit DAC with push-pull amplifier. The microprocessor can implement software based on audio processing, function control and others. For audio processing, melody and speech can be mixed into one output. GPCD9002A is implemented with a high performance SPU voice engine to play maximum 8-channel voice with ADPCM/PCM data. It operates over a wide voltage range of 2.4V - 5.5V and includes Low Voltage Reset function. In addition, GPCD9002A provides sleep mode for power savings. It can be waked up from sleep mode by interrupt sources or by IO's state change. There is a Serial Peripheral Interface (SPI) controller built-in GPCD9002A to facilitate communicating with other devices and components.

Features

• Working Voltage: 2.4V - 5.5V
• CPU speed: Max. 8MHz.
• F_OSC = Max. 16MHz (2 x CPU clock)
• External ROM Max. 4M bytes
• RAM size: Max. 512 bytes 
• Three 12-bit timer/counter, TMA with capture and comparison function, TMB/TMC with comparison function
  (Programmable and auto reload)
• Sleep mode to reduce power
• Key change wakeup function
• 16 IRQs & 7 NMI interrupts
• Watchdog function
• 5.5V to 3.3V regulator
• Low Voltage Reset and Low Voltage Detection
• 32 general I/Os (bit programmable)
• 8 I/O with high sink current for LED application
• All IOs with 1M pull low function to prevent current leakage from error key touch
• One 14-bit DAC with push-pull amplifier for direct drive speaker
• SPU (Sound Processing Unit) engine can output audio data with 14-bit resolution to perform high quality voice/melody
• IR PWM Output
• Hardware PWMIO supports 4 LED outputs(IOB[3:0]) with brightness control of 256-level
• Real-time clock
• 8-channel SPU engine with ADPCM/PCM wave table
• Two sets of 14 bits software channel with noise filter to play high quality sound.
• Generalplus ICE_CORE embedded, new Application can be developed using G+Midiar^® Development tools
• Interface to speed up flash program and read
• Tone color (Speech) with ADPCM algorithm to save memory usage
• 10-bit ADC with 8 channels line-in
• SPI master interface