Products - GPCV6248A



GPCV6248A Copy Link.


Major Camera ResolutionSIP DRAM DensityLCD I/FPackageWi-Fi
1080p16MB24bit-RGB/MCU/MIPILQFP128O



General Description

GPCV6248A, a highly integrated SoC (System-On-a-Chip), offers a great cost-effective and high performance ratio solution for multimedia applications.  It is embedded the ARM7TDMI with 16K-byte unified ID-cache and many tremendous features such two dedicated JPEG CODEC, ISP for better image quality , SPI FLASH controller which CPU can run program directly on it, DDR controller, TFT-LCD interface, Rotator engine,  MIPI-TX DSI interface, CMOS sensor interface, MIPI RX interface with two data lanes, two UART interfaces which support smart card interface(ISO7816), 8-channel DMA controller, 6-channel 16-bit timers, RTC, two SD/MMC card interfaces, USB 2.0 host/device, interrupt controller, SPI (master/slave) controller, programmable I/O ports, mono 16-bit DAC with AMP for audio playback, 16-bit sigma-delta ADC with MIC and PGA, PLL, 2-ch 12-bit SAR ADC, power control macro and up to 247.5K-byte embedded SRAM.

With a complete set of common system peripherals, the GPCV6248A chip minimizes overall system cost and no additional component needs to be added.  Not only does GPCV6248A feature the high-speed performance, but it is also a cost-effective system and the most importantly - compatible with all ARM based programs.


Features

    • ARM7TDMI CPU with 16KB unified ID-cache, embedded JTAG ICE, and working frequency up to 225MHz.
    • Up to 247.5KB SRAM for local data buffer and audio/video buffer
    • JPEG CODEC support MJPEG 1920x1080/640x480 30fps encode/decode function.
    • ISP for CMOS sensor raw data processing
      • De-noise
      • Sharpen
      • AE/AWB
    • DDR Controller with 16-bit data bus
    • SPI FLASH controller which CPU can run program directly on it. Supports 1-bit/2-bit/4-bit IO mode. The max. freq. of SPI clock is 70MHz.
    • 4-lane MIPI-TX DSI support up to 720x1280 resolution
    • Video-in & CMOS sensor interface and CCIR601/CCIR656 standard supported.
    • MIPI RX with two data lanes supported
    • Three Scalars for image scaling and image format convert
    • Eight-channel DMA controller
    • TFT-LCD controller
      • (serial RGB)
      • (serial RGB dummy)
      • Parallel-RGB with 18/16/24-bit data(6-6-6,5-6-5,8-8-8)
      • I80 (8-bit system bus) I/F type
      • CCIR601/CCIR656
      • Up-scale function
      • Edge enhance
      • Gamma Table Adjustment
      • Hue Adjustment
    • Interrupt Controller.
    • Universal Serial Bus (USB) 2.0 high/full speed compliance device and USB host(OHCI and EHCI) with built-in transceiver. Supports Bulk IN/OUT, Audio ISO IN/OUT, Video ISO IN and Interrupt IN transactions.
    • Watchdog timer
    • Eight16-bit timers/counters with CCP functions
    • Two SD/ SDHC/ SDIO/ MMC card interfaces.
    • SPI (master/slave) interface with data rate up to 24Mbps.
    • Two UART (asynchronous serial I/O) interfaces with baud rate up to 1.8432Mbps. The UART interface can be configured as smart card interface(ISO7816)
    • I2C controller
    • Programmable general I/O ports (GPIO) with pull-high/low control.
    • Built-in Power macro for power on/off controller and a 3.3V to 1.2V LDO for core logic
    • 3V to 2.8V LDO for CMOS sensor
    • 3V to 2.5V LDO for DDR
    • Dedicated 3.3V to 3.0V LDO for audio ADC
    • Dedicated 3.3V to 3.0V LDO for PLLs
    • Independent power Real-time clock (RTC) with 128-Byte SRAM for data saving after power off
    • Internal 12MHz generator(XCKGEN) with 32768 Crystal
    • Two PLLs, range from 36MHz to 450MHz with 4.5MHz step
    • 16-bit mono DAC with AMP for audio playback
    • 12-bit ADC with two line-in channels and two internal channels for 2V and temperature measurement.
    • 16-bit Sigma-Delta ADC with MIC and PGA
    • 4-lane MIPI-TX DSI PHY
    • 2-lane MIPI-RX PHY which can be configured to one 2-lane MIPI RX or two 1-lane MIPI RX.
    • LQFP128 package

 

Please input the answer before download.