产品资讯 - GPM32F1206CL

General Description

The GPM32F1206CL series of industrial microcontroller is based on the Arm® Cortex®-M0 processor core and operates at a frequency of up to 80MHz. The GPM32F1206CL series are optimized for motor control, power conversion, home appliances and general purpose applications. GPM32F1206CL series operates in the -40°C to 105°C temperature range from 3.05V to 5.5V wide voltage supply.

Features

• CPU Subsystem
  • CPU Core
• Arm^® Cortex^®-M0 32-bit CPU (80MHz max)
• Nested Vectored Interrupt Controller (NVIC) with 32 Interrupt Sources
• 24-bit SysTick Timer
• Single Cycle 32bit Multiplier Instruction
  • MATH Co-Processor (MATH)
• 24-bit Trigonometric Calculation (CORDIC)
• Hardware Divider
• Memories
  • 13K bytes SRAM
  • 4K bytes System Memory for Loader
  • 60K bytes (Max) Program Memory
• Configurable Data Memory is supported.
• Clock Management
  • Internal Oscillator: 8MHz.
  • Internal Oscillator: 32KHz±50%
  • Phase Lock Loop : 80MHz (Max)
• The PLL output frequency is based on M Coefficient.
• Power Management
  • In SLEEP Mode: Only the CPU is stopped.
  • In DEEPSLEEP Mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog peripherals
  • Up to 2 A/D Converters with 1M SPS and 16 analog inputs.
  • Up to 2 fast Analog Comparators (ACMP).
  • Up to 1 Operational Amplifier (OPA).
• With Unity gain frequency 10 MHz.
• Differential or Single input is available.
  • Die Temperature Sensor
  • Low Voltage Reset (2.9V, 4.2V)
  • Low Voltage Detector (3.4V, 4.4V)
• Industrial Control Peripherals
  • 16-bit Capture/Compare/PWM Units 4 (CCU4)
  • 16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)
• For motor control and power conversion.
  • 24-bit Position Interfaces (POSIF)
• For hall sensor and motor positioning.
• System Control
  • Up to 4 channels DMA controller.
• Support peripheral: Timers, eCCU6, CCU4, ADCs, I²Cs, UARTs, SPIs.
  • Watchdog Timer for safety sensitive applications.
  • System Management Unit (SMU) for system configuration and control.
  • 96-bit Unique ID
• I/O Ports
  • Max 44 fast multifunction bi-directional I/Os.
• All I/Os support external interrupt vectors.
• Built-in Pull-Up/Pull-Down Resistor
• I/O ports with 21mA/21mA source/sink current.
• Timer
  • Up to 2 16bit general timers.
• Communication Peripherals
  • Up to 1 I2C.
  • Up to 1 SPI (Clock 20MHz max).
  • Up to 2 UART.
• Full duplex and half duplex are supported.
• Security
  • 4 Security Levels are supported.
• Debug System
  • Arm^® Serial Wire Debug (SWD)
  • 4 Hardware Breakpoints
  • 2 Watch Points
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • HBM 4KV
  • MM 400V
  • CDM 500V
• Package
  • LQFP48