Terms and Conditions for
Website usage and Personal Information Collection
The content of the pages of this Website is for your general information and use only.
We will collect, process, and use your personal information for data processing and information services (the “Purpose”), the information including but not limited to your name, nationality, birthday, ID number, telephone number, address, E-mail address, career, title. You have the right to access, review, obtain copies, supplement or correct your personal information. Meanwhile, you are entitled to request us to cease the collection, process, and utilize or delete your personal information as the Purpose is no longer required.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this Website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this Website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this Website meet your specific requirements.
This Website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website which are not the property of, or licensed to, the operator are acknowledged on the Website.
Unauthorised use of this Website may give rise to a claim for damages and/or be a criminal offence.
From time to time this Website may also include links to other Websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the Website(s). We have no responsibility for the content of the linked Website(s).
From time to time we may amend the contents of this Terms and Conditions without notice, and any amendments will be publicized on this Website. If you disagree with any amendments, please cease to use this Website and exercise your right to request us discontinue to collect, process or use your personal data. Otherwise, you are considered to have agreed to the amendment.
Your use of this Website and any dispute arising out of such use of the Website is subject to the laws of Taiwn.
This website and its contents and images are the copyrighted works of Generalplus Technology Inc. - c Generalplus Technology Inc. 2016. All rights reserved.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:
you may print or download to a local hard disk extracts for your personal and non-commercial use only
you may copy the content to individual third parties for their personal use, but only if you acknowledge the website as the source of the materials
You may not, except with our express written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.
Products - GPM32F6006U
Working Voltage (V)
CPU OSC. Int
The GPM32F6006X series of industrial microcontroller is based on the ARM® Cortex® -M0 processor core and operates at a frequency up to 32MHz. The GPM32F6006X series are optimized for high precision mixed signal measurement, home appliances and general purpose applications. GPM32F6006X operates in the -40°C to 85°C temperature range from 2.2V to 5.5V wide voltage supply.
ARM® Cortex®-M0 32-bit CPU (32MHz max) with Code Fetch Accelerator
Nested Vectored Interrupt Controller (NVIC) with 32 Interrupt Sources
24-bit SysTick Timer
Single Cycle 32bit Multiplier Instruction
MATH Co-processor (MATH)
8K bytes SRAM
4K bytes System Memory for Loader
Up to 60K bytes (max) Program Memory
Configurable Data Memory Supported
Internal Oscillator: 32MHz±2% at 2V~5.5V / -40~85°C
Internal Oscillator: 35KHz±10%
External Crystal Oscillator: 32KHz, PPM Calibration Support
In SLEEP Mode: Only the CPU is stopped.
In DEEPSLEEP Mode: All clocks are stopped.
In Shut-Down Mode: Core power is off and RTC is alive.
Power On Reset (PORRESETn)
PAD Reset (PADRESETn)
Master Reset (MRESETn)
System Reset (SRESETn)
54 Programmable Digital I/O Ports
10 Dedicated General Purpose Digital I/O Ports
44 programmable digital I/O ports multiplexed with LCD COM/Segment.
1 Input port multiplexed with ON-KEY.
2 input ports multiplexed with X32K-IN and XTAL32K_OUT.
I/O ports with 8mA/4mA source/sink current.
Up to 2 Serial Peripheral Interfaces (SPI)
Up to 3 Universal Asynchronous Receiver Transmitters (UART)
Up to 2 Inter Integrated Circuit Interfaces (I2C)
Up to 2 16-bit General Timers
Industrial Control Peripherals
16-bit Capture/Compare/PWM Units 4 (CCU4)
16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)
For motor control and power conversion.
Up to 8 Channels DMA Controller
Watchdog Timer (WDG) for safety sensitive applications.
System Management Unit (SMU) for system configuration and control.
96-bit Unique ID and 256-bit GeneralPlus ID.
Provides independent RTC hardware IP (Power RTC) and general digital internal RTC (Internal RTC).
Provides independent power system in Power RTC.
Provides real-time clock and calendar function.
Supports 8 wake-up sources with different cycle and a 512-day calendar.
Provides 128B memory for storing backup information in Power RTC.
Supports clock calibration mechanism to calibrate the clock drift from the 32768-HZ crystal oscillator in POWE RTC.
Supports CRC8 Polynomial-0 = 0x1D.
Supports CRC8 Polynomial-1 = 0x07.
Supports CRC16 Polynomial-0 = 0x8005.
Supports CRC16 Polynomial-1 = 0x1021.
Supports CRC32 Polynomial-1 = 0x04C11DB7.
A 12-bit SAR ADC with 1M SPS and 16 analog inputs.
A 24-bit Delta Sigma ADC
A 6-bit Current DAC
A Low Noise Operational Amplifier
A Lamp Dedicated OP Amplifier
Low Voltage Reset (2.0V, 2.6V, 3.0V, 4.0V)
Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
12-bit PWM driver for driving buzzer directly.
Supports 1/4 duty, 1/5 duty and 1.6 duty at 1/3 bias.