產品資訊 - GPM32F9010RLQ

General Description

The GPM32F9010RLQ series of industrial microcontroller is based on the ARM® Cortex®-M0 processor core and operated at a frequency of up to 152MHz. The GPM32F9010RLQ series are optimized for motor control, power conversion, home appliances and general purpose applications.

GPM32F9010RLQ series operates in the -40°C to 125°C temperature range from 2V to 3.6V wide voltage supply.

Features

• AEC-Q100 Grade1 Certification
• CPU Subsystem
  • CPU Core
• ARM^® Cortex^®-M0 32-bit CPU (152MHz max) with Code Fetch Accelerator
• Nested Vectored Interrupt Controller (NVIC) with 32 Interrupt Sources
• 24-bit SysTick Timer
• Single Cycle 32bit Multiplier Instruction
  • MATH Co-Processor (MATH)
• 24-bit Trigonometric Calculation (CORDIC)
• Hardware Divider
• Square Root Operation
• Memories
  • 24K bytes SRAM (Up to 32KB is configurable.)
  • 8K bytes System Memory for Loader
  • 1K bytes Data Memory
  • 119K/63K bytes (Max) Program Memory
• Configurable Execute Read Only Memory is supported.
• 8K bytes zero wait state for high performance application.
• Clock Management
  • Internal Oscillator: 16MHz±5%
  • Internal Oscillator: 32KHz±3%
  • External Crystal Oscillator: 8MHz ~ 24MHz
  • Phase Lock Loop: 152MHz (Max)
• The PLL output frequency is based on M/N Coefficient.
• Power Management
  • In SLEEP Mode: Only the CPU is stopped.
  • In DEEPSLEEP Mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
  • Configurable PAD Reset (PADRESETn)
  • Low Voltage Reset (1.9V, 2.0V, 2.2V, 2.6V)

 

• Analog Peripherals
  • Up to 2 A/D Converters with 3M SPS and 22 analog inputs.
  • Up to 2 fast Analog Comparators (ACMP).
  • Up to 4 Operational Amplifiers (OPA).
• With Unity gain frequency 10 MHz.
• Differential or Single input is available.
  • Up to 2 12 bits / 1Msps DAC with programmable Buffer.
  • Die Temperature Sensor
  • Low Voltage Detector (2.0V, 2.1V, 2.3V, 2.5V, 2.7V, 2.8V, 9V)
• Industrial Control Peripherals
  • Up to 2 Capture/Compare/PWM Units 4 (CCU4).
  • Up to 2 Enhance Capture/Compare/PWM Units 8 (eCCU8).
• For motor control and power conversion.
  • Up to 3 Timer Units (TMU).
  • Up to 2 Position Interfaces (POSIF).
• For hall and quadrature encoders and motor positioning.
• System Control
  • Up to 8 channels DMA controller.
• Support peripheral: TMU, eCCU8, CCU4, ADCs, I²Cs, UARTs, SPIs, DACs.
  • Watchdog Timer (WDG) for safety sensitive applications.
  • System Management Unit (SMU) for system configuration and control.
  • 224-bits Unique ID
• I/O Ports
  • Max 55 fast multifunction bi-directional I/Os.
• Max 55 I/Os support external interrupt vectors.
• Built-in Pull-Up/Pull-Down Resistor
• I/O ports with 4mA/8mA/12mA/16mA source/sink current.
• Communication peripherals
  • Up to 3 I2C.
  • Up to 3 SPI (Clock 50MHz Max).
  • Up to 5 UART.
• Full duplex and half duplex are supported.
• LIN (Local Interconnect Network) bus communication is supported.
• Debug System
  • ARM^® Serial Wire Debug (SWD)
  • 4 Hardware Breakpoints
  • 2 Watch Points
• Operation Temperature
  • -40°C to 125°C
• Reliability
  • HBM (AEC Q100 002) 2KV
  • CDM (AEC Q100 011) 750V
• Package
  • LQFP64