Products - GPM32FD0114B

GPM32FD0114B Copy Link.

ROM TypeWorking Voltage(V)Speed(MHz)ROM(Byte)RAM(Byte)ADC(12bit)Motor BLDCMotor Sensor-lessMotor SINTMR/CNTCPU OSC. INTCPU OSC. X'TALOP / ComparatorPWMMDU/CORDICLVRIO No.UART/SPI/12CPreDriver for SOCPKG
Flash2.3~5.59232K8K/4K16-ch/2setVVV4V-4/210VV172/-/2PN Ch / 40VSSOP28

General Description

The GPM32FD0114B series of industrial microcontroller is based on the ARM® Cortex®-M0 processor core and operates at a frequency of up to 92MHz. The GPM32FD0114B series devices are optimized for motor control, power conversion, home appliances and general purpose applications.  GPM32FD0114B operates in the -40°C to 85°C temperature ranged from 2.3V to 5.5V wide voltage supply.


  • CPU Subsystem
    • CPU Core
      • ARM® Cortex®-M0 32-bit CPU (92MHz max) with Code Fetch Accelerator
      • Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
      • 24-bit SysTick timer
      • Single cycle 32bit multiplier instruction
    • MATH Co-processor (MATH)
      • 24-bit trigonometric calculation (CORDIC)
      • Hardware Divider
  • Memories
    • 8K bytes SRAM (Up to 12KB is configurable)
    • 4K bytes System Memory for loader
    • 32K bytes (max) Program Memory
      • Configurable Data Memory supported
  • Clock Management
    • Internal oscillator: 8MHz±5%@ 2.3V~5.5V / -40°C~85°C
    • Internal oscillator: 32KHz±50%
    • Phase Lock Loop : 92MHz(max)
      • The PLL output frequency based on M/N Coefficient
  • Power Management
    • In SLEEP mode: Only the CPU stopped.
    • In DEEPSLEEP mode: All clocks are stopped.
  • Reset Management
    • Power On Reset (PORRESETn)
    • PAD Reset (PADRESETn)
    • Master Reset (MRESETn)
    • System Reset (SRESETn)
  • Analog peripherals
    • Up to two A/D Converters with 1M SPS and 16 analog inputs
    • Up to two fast Analog Comparators (ACMP)
    • Up to four Operational Amplifier (OPA)
      • With Unity gain frequency 20 MHz
      • Differential or Single input available
    • Die Temperature Sensor
    • Low Voltage Reset (2.1V, 2.7V, 3.2V, 4.2V)
    • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
  • Industrial Control Peripherals
    • 16-bit Capture/Compare/PWM Units 4 (CCU4)
    • 16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)
      • For motor control and power conversion
    • 24-bit Position Interfaces (POSIF)
      • For hall and quadrature encoders and motor positioning
  • System Control
    • Up to 8 channels DMA controller
      • Support peripheral : Timers, eCCU6, CCU4, ADCs, I2Cs, UARTs
    • Watchdog Timer (WDG) for safety sensitive applications
    • System Management Unit (SMU) for system configuration and control
    • 96-bit Unique ID
  • I/O Ports
    • Max 17 fast multifunction bi-directional I/Os
      • All I/Os support external interrupt vectors
      • Built-in pull-up/pull-down resistor
      • I/O ports with 15mA/20mA source/sink current
  • Timer
    • Up to two 16-bit general timers
  • High Side and Low Side Gate Driver
    • Built in dead time for short through protection.
    • Drives three phase P-Ch + N-Ch MOSFET.
    • Built in thermal shutdown protection.
  • Communication peripherals
    • Up to two I2C
    • Up to two UARTs
      • Full duplex & half duplex supported
  • Security
    • Four Security Levels supported
  • Debug System
    • ARM serial wire debug (SWD)
    • Four hardware breakpoints
    • Two watch points
  • Operation Temperature
    • -40°C to 85°C
  • Reliability
    • HBM 4KV / MM 400V / CDM 500V
  • Package


Please input the answer before download.