Products - GPM32FD8006D

General Description

GPM32F8006D, an industrial microcontroller based on the ARM^® Cortex^®-M0 processor core, integrates WPC QI standard of version 1.3 and has high performance in PACKET(signal) Demodulation. Several protection approaches such as overcurrent, low voltage, thermal protection, Q-Factor protection, and offset protection are designed to prevent system from running into abnormal condition.

Features

• CPU Subsystem
  • CPU Core
• ARM^® Cortex^®-M0 32-bit CPU with Code Fetch Accelerator
• Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
• 24-bit SysTick timer
• Single cycle 32bit multiplier instruction
  • MATH Co-processor (MATH)
• 24-bit trigonometric calculation (CORDIC)
• Hardware Divider
• Memories
  • 8K bytes SRAM (Up to 12KB is configurable)
  • 4K bytes System Memory for loader
  • 60K bytes (max) Program Memory
• Configurable Data Memory supported
• Clock Management
  • Internal oscillator: 8MHz±5%@ 2.3V~5.5V / -40°C~105°C
  • Internal oscillator: 32KHz±50%
  • External crystal oscillator : 4MHz ~ 12MHz
  • Phase Lock Loop: 92MHz(max)
• The PLL output frequency based on M/N Coefficient
• Power Management
  • In SLEEP mode: Only CPU stopped.
  • In DEEPSLEEP mode: All clocks stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog peripherals
  • Up to two A/D Converters with 1M SPS and 16 analog inputs
  • Up to two fast Analog Comparators (ACMP)
  • Up to four Operational Amplifier (OPA)
• With Unity gain frequency 20 MHz
• Differential or Single input available
  • Die Temperature Sensor
  • Low Voltage Reset (2.1V, 2.7V, 3.2V, 4.2V)
  • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
• System Control
  • Up to 8 channels DMA controller
• Supported peripherals: Timers, eCCU6, CCU4, ADCs, I²Cs, UARTs, SPIs
  • Watchdog Timer (WDG) for safety sensitive applications
  • System Management Unit (SMU) for system configuration and control
  • 96-bit Unique ID
• I/O Ports
  • 34 fast multifunction bi-directional I/Os
• All I/Os support external interrupt vectors
• Built-in pull-up/pull-down resistor
• I/O ports with 15mA/20mA source/sink current
• Timer
  • Up to two 16-bit general timers
• Communication peripherals
  • Up to two I2Cs
  • Up to two SPIs (Clock 24MHz max)
  • Up to three UARTs
• Full duplex & half duplex supported
• Synchronous MOSFET Gate Driver
  • Built-in adjustable dead time control for short-through protection
  • Built-in bootstrap P-CH MOSFET inside the chip
  • Built in thermal shutdown protection
• Security
  • Four Security Levels supported
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • HBM 4KV
  • MM 400V
  • CDM 500V
• Package
  • QFN48