Products - GPM8F1006CL GPM8F1016VK

General Description

GPM8F10x6 series has two types of controllers: GPM8F1006CL and GPM8F1016VK.  The high speed code area size of 32KB program memory is the main difference between these two.  More details are given in the following section.  GPM8F10x6 is a highly integrated microcontroller which integrates a pipelined 1T 8051 CPU, 2K-byte XRAM, 256-byte IDM SRAM and 64K-bytes of program FLASH.  It features a maximum of 38 programmable multi-functional I/Os, Timer0/1/A/B/C, UART0/1, SPI (master/slaver), I2C (master/slaver), one OP, two comparator, 72MHz PLL, 16-bit x 16-bit multiplier, 32-bit / 16-bit divider, 16-bit adder, 16-bit subtractor, 32-bit shifter and two 8-channel SAR ADCs with 12-bit resolution.  It operates over a wide range of working voltage, from 3.2V through 5.5V based on various clock sources provided.

Features

• CPU
• High speed, high performance 1T 8051
• 100% software compatible with industry standard 8051
• Pipeline RISC architecture enables to execute instructions 10 times faster than standard 8051
• Up to 72MHz clock operation
• Memory
• 2K-byte of external RAM.
• 256-byte internal Data Memory (IDM) SRAM
• GPM8F10x6 contains 12K-bytes high speed code area in 64K-bytes of program FLASH.
• 64K-bytes FLASH with high endurance
• Minimum of 100,000 program/erase cycles
• Minimum of 10-year data retention
• 1KB page size
• Programming read only level for software security
• Clock Management
• Internal oscillator: 8.533MHz±2% @ 4V~5.5V
• Internal oscillator with PLL: 72MHz
• Interrupt Management
• 13 interrupt sources
• Up to 4 external interrupt sources
• Reset Management
• Power On Reset (POR)
• Low Voltage Reset (LVR)
• Pad Reset (PAD_RST)
• Watchdog Reset (WDT_RST)
• Software Reset (S/W_RST)
• FLASH Access Error Reset (ADDR_ERR_RST)
• Programmable Watchdog Timer
• A time-base generator
• An event timer
• System supervisor
• One OP
• Two Comparators
• I/O Port
• Maximum of 38 multifunction bi-direction I/Os
• Each IO incorporates with options of pull-up resistor, pull-down resistor, output high, output low, output driving capability and floating input whichever is determined by the setting on the corresponding registers
• I/O ports with 12mA current sink
• I/O ports with 12mA current drive
• Two 16-bit Timers/Counters (Timer 0/1)
• Timer mode with selectable clock sources
• Auto-reloadable 8-bit timers
• Externally gated event counters
• Three Powerful Timers: TimerA/ TimerB/ TimerC with 16-bit Compare/ Capture/ PWM Unit
• Timer mode with clock source options
• Auto-reload 16-bit timers
• Event capturing
• Pulse width modulation and measurement
• UART0/1
• One synchronous mode
• Three asynchronous modes
• SPI (master / slaver mode)
• Programmable phase and polarity of master clock
• Programmable master SPI clock frequency
• SPI clock: 24MHz (F_pll /2) @64MHz
• I2C (master / slaver mode)
• Programmable master I2C clock frequency
• Max I2C clock: 375KHz (F_pll /128) @64MHz
• A/D Converter
• Two 8-channel 12-bit resolution ADCs
• Control independent per set
• Built-in Low Voltage Reset
• Trigger level: 2.9V
• Built-in Low Voltage Detect
• Programmable level: 3.4V, 4.4V
• MDU
• 16-bit x16-bit signed / un-signed multiplier
• 32-bit /16-bit signed / un-signed divider
• 16-bit +16-bit signed / un-signed adder
• 16-bit -16-bit signed / un-signed subtracter
• 32-bit arithmetic shifter
• Coordinate Rotation Digital Computer (CORDIC)
• Q- Format
• Normal- Formal
• On-chip Debug Unit
• C compatible development tools