Products - GPMQ9103A

General Description

GPMQ9103A is a high-efficiency, Qi-compliant wireless power receiver targeted for applications up to 15W. Using magnetic inductive charging technology, the receiver converts an AC power signal from a resonant tank to a programmable regulated 5V, 7V, 9V or 12V DC output voltage. The integrated, low RDSON synchronous rectifier and ultra-low dropout linear (LDO) regulator offer high efficiency, making the product ideally suited for battery-operated applications.  GPMQ9103A is available in a 52-WLCSP package, and it rated for a 0 to 85°C ambient operating temperature range.

Features

• WPC compliant
  • Single-chip wireless power receiver up to 15W application
  • WPC-1.2.3 compliant
• Synchronous Rectifier
  • 96% Efficiency for Fully Synchronous Rectifier
  • 97% Efficient for Post Regulator
  • 85% System Efficient at 15W with GPMQ8006B TX
  • Integrated Synchronous Full Bridge Rectifier Circuit
    • 3 modes auto-switch
      • Synchronous rectification(VRECT ≧ UVLO, dynamical switched by IOUT > ITH)
      • Diode rectification(VRECT ≧ UVLO, dynamical switched by IOUT < ITH)
      • Diode bridge(VRECT < UVLO)
    • Low R_DS ON resistance
      • Hi-side 35mΩ
      • Low-side 35m
    • Under Voltage Lockout (UVLO)
      • Threshold volt : 2.8v detect on VRECT

• • Output Voltage
    • LDO Mode
      • Configurable VOUT Level: 5v, 7v, 9v, 12v
      • Configurable VOUT Deviation: -2%, 0%, 2%, 4%
    • Switch Mode
      • VOUT follow up with VRECT
    • OFF Mode (VOUT floating)
      • External EN pin = 1
      • UVLO occurs
      • Register VOUT_EN = 0
      • OTP occurs.

• • Maximum output current : 1.67A (OCL = 2A)
• System Protection
  • VRECT Over Voltage Protection (Detect)
    • Configurable detected level: 15V, 17V, 19V, 21V
  • Over Current Limit
    • Configurable 1A , 1.5A, 2A
  • Over Temperature Protection
    • 140˚C, thermal shutdown
    • 130˚C, thermal warning
  • VOUT Over Voltage Protection
    • Detected level as VOUT *1.25
• FSK De-modulator
  • AC1 FSK de-modulated
• CPU Subsystem
  • CPU Core
    • ARM^® Cortex^®-M0 32-bit CPU (48MHz max)
• Memories
  • 2K Bytes System RAM
  • Up to 16K Bytes One Time Programmable Memory
• Clock Management
  • Internal oscillator: 48MHz±5% @ 3V~5.5V with -40°C to 85°C
• Power Management
  • Power off when External EN pin goes high.
    • Regulator 5v switch to low current mode
    • Regulator 1.8v shut down
• Reset Management
  • Power On Reset
    • Power RESET state, VRECT < UVLO
  • PAD Reset (SCL/PADRESETn_RSTn)
  • Master Reset (MRESETnn)
  • System Reset (SRESETnn)
• Analog peripherals
  • 10Bit A/D Converters with 107 KSPS and 12 analog inputs
    • Reference voltage as 2.1v
    • User-programmable foreign-object detection (FOD)
    • Dedicated remote temperature sensing
  • Regulator 5V
  • Regulator 1.8V
• System Control
  • Watchdog Timer (WDT) for safety sensitive applications
  • System Management Unit (SMU) for system configuration and control
• I/O Ports
  • External enable active low, input pin.
  • Interrupt pin (INT), open drain pin.
  • Max 5 multifunction bi-directional I/Os
• Timer
  • Up to 3 general timer with 16bit counter
• Communication peripherals
  • Built-in I2C
• Debug System
  • ARM serial wire debug (SWD)
  • Supporting up to 4 hardware breakpoints
  • Supporting up to 2 watch points
• Operation Temperature
  • -40°C to 85°C
• Reliability
  • HBM 2KV
  • MM 200V
  • CDM 500V
• Package
  • WLCSP 2.64X3.94-52B
  • TQFN5x5-40