Genealplus Website requires enable JavaScript!


How to enable JavaScript? Look here

Generalplus Technology Inc.

Terms and Conditions for
Website usage and Personal Information Collection


Welcome to our Website. If you continue to browse and use this Website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Generalplus Technology Inc.’s relationship with you in relation to this Website. If you disagree with any part of these terms and conditions, please do not use our website. The use of this website is subject to the following terms of use:
  • The content of the pages of this Website is for your general information and use only.
  • We will collect, process, and use your personal information for data processing and information services (the “Purpose”), the information including but not limited to your name, nationality, birthday, ID number, telephone number, address, E-mail address, career, title. You have the right to access, review, obtain copies, supplement or correct your personal information. Meanwhile, you are entitled to request us to cease the collection, process, and utilize or delete your personal information as the Purpose is no longer required.
  • This Website uses cookies to monitor browsing preferences. If you do allow cookies to be used, the following personal information may be stored by us for use by third parties.
  • Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this Website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
  • Your use of any information or materials on this Website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this Website meet your specific requirements.
  • This Website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
  • All trademarks reproduced in this website which are not the property of, or licensed to, the operator are acknowledged on the Website.
  • Unauthorised use of this Website may give rise to a claim for damages and/or be a criminal offence.
  • From time to time this Website may also include links to other Websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the Website(s). We have no responsibility for the content of the linked Website(s).
  • From time to time we may amend the contents of this Terms and Conditions without notice, and any amendments will be publicized on this Website. If you disagree with any amendments, please cease to use this Website and exercise your right to request us discontinue to collect, process or use your personal data. Otherwise, you are considered to have agreed to the amendment.
  • Your use of this Website and any dispute arising out of such use of the Website is subject to the laws of Taiwn.


Copyright Notice
This website and its contents and images are the copyrighted works of Generalplus Technology Inc. - c Generalplus Technology Inc. 2016. All rights reserved.

Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:
  • you may print or download to a local hard disk extracts for your personal and non-commercial use only
  • you may copy the content to individual third parties for their personal use, but only if you acknowledge the website as the source of the materials

You may not, except with our express written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.







* : Require
*Country
*Email Address
*Password
*Re-type password
*First name
*Last name
Phone
Occupation
Company name
Project information
Major IC part number in project
max length : 500 characters.
*Validation Code



Old Password

New Password

Re-type password

Products - GPA7740A



GPA7740A


Shipment formCPUFPUCacheInternal RAMDRAM Type & DensityNAND & ECCSDC SD3.0USB 2.0 Host/DeviceLCDHDMIGPUGraphic EngineSound EngineCamera InputISP(CDSP)GPDLAUART/IrDASPII2CI2SDACADCAESSecurityTrust ZoneRTCPWM I/Omaximum GPIO numberMultimedia CodecMP3Ethernet MAC
LQFP128ARM Cortex-A7 660MHz2KB/32KB L2: 128KBNEON, FPUL1: 32KB/32KB L2: 128KBmax 470KBpenGL ES2.0, OpenVG 1.1DDR2 64MB12bit ECCx2 •2/2MIPI/TFT/ CSTN/STN0P w/ HDCP1080P3D GPUPPU16Ch2XMIPI/CCIR656/CCIR60113M RAW64MACx3x2x36xI 6xO16bitx2MIC/Line-in256bitsSHA-512, RSA-2048, TRNG, OTP• (indep. power)x872MJPEG, H.264 1080P60 HP



General Description

GPA7740A, a highly integrated SoC (System-On a Chip) by Generalplus, is a high cost-performance ratio solution for multi-media, video streaming and AI applications. It is developed with a high performance and power efficient 32-bit single-core ARM Cortex-A7. GPA7740A can be operated at up to CPU/system 666/222MHz with significant enhancements in ISP processing, 2D/3D Graphics accelerating, video CODEC processing, audio process, deep learning accelerating and a rich set of peripherals.


Features

  • 32-bit Single-Core Arm Cortex-A7
    • L1 32-Kbyte I Cache / 32-Kbyte D Cache
    • 128-Kbyte Unified Level 2 Cache, Embedded JTAG
    • With NEON and FPU
    • ICE with SWD/JTAG Interface
    • Working frequency up to 666MHz.
  • Up to 470KB SRAM (Dedicated 128KB SRAM) for local data buffer
  • DDR2 SDRAM controller with 16-bit data bus supports up to 1066Mbps (DDR2 clock 533MHz).
  • SPI FLASH controller allows CPU directly running program on it, and supports 1-bit/2-bit/4-bit IO mode.
  • 3D GPU supports OpenGL ES2.0, OpenVG 1.1
    • Up to 22 Mtriangle/s, 112 Mpixel/s
  • Picture Process Unit (PPU)
    • Four Text layers + 1024 internal Sprites + 4096 extended Sprites
    • Virtual 3D effect for text and sprite.
    • QVGA/VGA/D1 and arbitrary size up to 2032x2032 output.
    • Line-Based or Frame-Based Operation
    • 1920x1080 LCD Resolution Output
    • Texture mapping with anti-aliasing and bilinear interpolation.
  • Sound Process Unit (SPU)
    • 16 Hardware PCM/ADPCM Channels
    • Built-in Dynamic Volume Compressor
    • MP3/WMA Decoder
  • Two JPEG CODEC
    • ISO/IEC 10918-1 Baseline JPEG
    • High-speed decoding and encoding with resolution up to 64MPixel.
    • Hardware Motion JPEG decoding and encoding (up to 1080p 70fps at Q70) for real-time video record and playback application.
  • 264 CODEC supports up to 2560x1440 30fps.
    • FBC(Frame buffer compression) is supported for reference frame accessing.
  • Video-in & CMOS sensor interface and CCIR601/CCIR656 CSI standard are supported.
  • One 2-lane MIPI CSI input supported with data rate up to 1.3Gbps.
  • One of 4/2-lane MIPI CSI input supported with data rate up to 1.3Gbps.
  • Bnning mode engine A for 2-lane MIPI CSI input
    • Support divide 2 & 4 binning
    • Support skip and average mode
    • Support RAW8 and RAW10
    • Support input image crop
    • Support bypass mode
  • Bnning mode engine B for 4-lane MIPI CSI input
    • Support divide 2 & 4 binning
    • Support skip and average mode
    • Support RAW8 and RAW10
    • Support input image crop
    • Support bypass mode
    • Support 4 virtual channel input from 4-lane MIPI CSI input
  • GPDLAv2 is a deep learning accelerator which supports various deep neural network models. Applications such as object classifications, object detection and face detection are all possible, and will enrich user experience.
  • NAND FLASH controller with ECC and 4/8/12-bit BCH.
  • Eight-Channel DMA Controller
  • Security H/W Accelerator:
    • AES supports key length 128-bit/192-bit and 256-bit.
    • HASH supports SHA2-256 / SHA2-512 / SHA3-224 / SHA3-256 / SHA3-384 and SHA3-512 for AES GCM mode.
    • RSA supports data length 256/512/1024 and 2048-bit.
    • True Random Number Generator
  • Y-only rotating engine supports rotate in any angle.
  • Rotating engine supports 90/180/270/360/Mirror/Flip function.
  • Line-based rotating engine can rotate a DRAM image buffer by the multiples of 90 degrees. With TFT controller, the rotated data will be sent to TFT controller directly, and there won’t be any extra bandwidth consumption.
  • Two Sets of TFT-LCD Controller
    • UPS051 (Serial RGB)
    • UPS052 (Serial RGB dummy)
    • Parallel RGB (6-6-6, 5-6-5, 8-8-8)
    • I80 (8-bit/16-bit/18-bit System Bus) I/F Type
    • CCIR601/CCIR656
    • Built-in Timing Controller for TFT-LCD drivers.
    • Scaling engine inside with programmable up-scaling and down-scaling factor.
    • Gamma Table Adjustment (TFT1 Only)
  • Two Sets of TFT SPI interface controller
    • Supports programmable resolutions up to 320x320
    • The TFT clock can be a divisor of system clock (/2, ~ /64)
    • Support both 3-wire mode and 4-wire mode
  • Up to two-lane MIPI DSI interface which supports panel resolution up to 720x1920.
  • HDMI with HDCP resolution up to 1080p.
  • Two sets of Pscaler support transform and zoom-in/out image data to the format supported by JPEG/ISP/PPU MB2SCAN/DRAM.
  • One Y-only Pscaler for gray level output.
  • Embedded ISP (Image Processing Unit) supports raw data sensor up to 8M pixels.
    • Histogram statistics for auto brightness and contrast.
    • Programmable RGB Gamma Correction
    • Color conversion matrix for various post-image processing.
    • 2nd Generation Lens Uniform Correction
    • WDR
    • Sharpen
    • Bad-Pixel Cancelation
    • AE/AWE
    • 2D NLM De-noise
    • 3DNR
    • Binning Mode
  • Image Processing Unit
    • Maximum width more than 2048 pixels.
    • Address-remap supports direct addressing and coordinates addressing.
    • Color-remap only supports ARGB1555 and RGB565.
    • Sixteen OP modes are supported.
    • Alpha transform is supported.
  • FFT Accelerator
    • Support FFT32, FFT64, FFT128, FFT256, FFT512, FFT1024, and FFT2048.
    • Internal 24-bit accuracy for FFT calculation.
  • Two sets of Universal Serial Bus (USB) 2.0 high/full speed compliance device and USB OHCI/EHCE host controller with built-in transceiver.
  • Watchdog Timer
  • Eight 32-bit timers/counters with PWM output capability.
  • Eight-Channel Quadrature Decoder
  • SD 2.0/MMC Interface
  • SD 3.0 Interface
  • Two sets of SPI (master/slave) interface with data rate up to 24Mbps.
  • Three sets of UART (asynchronous serial I/O) or IrDA interface with baud rate up to 1.8432Mbps and 115.2Kbps. Smart card interface (ISO7816) is also supported.
  • Four sets of I2S input with 24-bit resolution and up to 192KHz sample rate.
  • Four sets of I2S output with 24-bit resolution and up to 192KHz sample rate.
  • Three sets of I2C
  • PDM to PCM converter which supports MEMS microphones with PDM interface.
  • Embedded Ethernet MAC Hardware
  • One set of hardware 3x3 box filter engine.
    • Resolution support up to 640x480
    • Y-only 3x3 filter, filer coefficients are programmable
  • LBP (Local Binary Patterns) and the maximum resolution is 640x480 pixels.
  • 86 general programmable I/O ports (GPIO) with pull-high/low control.
  • Power management integrates SD3.0 LDO, Sensor LDO, PLLs LDO. It also includes 4*Power-on key control and RTC wakeup control.
    • RTC has an independent power pad, and if the pad is always powered on, RTC can perform functions including issuing alarm and waking up the whole system.
    • Built-in 32KHz internal oscillator for no 32KHz crystal application, or quick startup of the system for the first time when RTC is powered on.
    • 3V to 2.8V regulator for sensor’s power.
    • Dedicated 3.3V to 1.8V LDO for SD 3.0 I/O.
    • Dedicated 3.3V to 2.8V LDO for PLLs.
    • Power on Reset and Low Voltage Reset
    • OVP11 (Over Voltage Protection) Detect
    • When the power of some IOs is kept in core power off mode, and these IOs and USB can wakeup the whole chip.
    • Power-down mode with low standby current, typically around 6uA.
  • Programmable system PLL frequency, from 216MHz to 1188MH, for CPU, and with a divider, the frequency can also be provided to system clock.
  • Programmable external PLL frequency from 72MHz to 639MHz for HDMI/TFT/GPDLA/GPU etc.
  • Audio PLL frequency can output 73.728MHz for 48KHz sampling-rate, and output 67.737MHz for 44.1KHz sampling-rate.
  • 16-bit stereo DAC (2-channel) for audio playback.
  • 12-bit SAR ADC with 5 line-in channels and 687.5Ksps.
  • Temperature sensor
  • 16-bit SDM ADC with MIC for audio recording.
  • MIC with Digital AGC (Auto Gain Control)
  • Audio compressor for audio dynamic range adjustment. Both microphone input and DAC output are supported.
  • LQFP128 with e-Pad Package
  • Operation voltage: I/O 3.3V, Core 1.1V, DDR2 1.8V.
  • Operation temperature: -20~85C.

Data Sheet

GPA7740AV13_ds.pdf   Copy Link.
Please input the answer before download.