GPL812P01C
| Working Voltage (V) | Max. CPU Speed(MHz) | ROM (Byte) | RAM (Byte) | I/O | COMxSEG Option | Bias | Duty | 32K OSC. | SPI/UART/RFC | WDT | LVD/LVR | Operating Temp. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.8~3.6 | 4 | 8K | 192 | 29 | 4X32 | 1/2, 1/3 | 1/2, 1/3, 1/4 | ROSC/X'TAL | - / - / 1 | √ | √ / √ | -20~70 |
General Description
GPL812P01C, a special designed CMOS 8-bit microprocessor by Generalplus, offers a competitive cost/performance ratio in the industry. It combines 192-bytes RAM, 8KB one-time programmable (OTP) ROM, up to 25 software selectable general I/Os, an interrupt controller, and an automatic display controller/driver in a small device. It has a Clock Stop mode for power savings. The power savings mode saves the RAM contents, but freezes the oscillator, causing all other chip functions to be inoperative, and the stop mode can be released by using external wakeup sources. This device is applicable for many applications such as low power watch and other LCD relevant products.
Features
- Built-in 8-bit processor
- 192-byte SRAM
- 8-byte OTP ROM
- 128 bit DPRAM
- Built-in 4MHz IOSC for system operation
- internal oscillator with ±5% precision .
- Built-in 32kHz IOSC or 32768Hz Crystal oscillator circuit for timebas
- Operating voltage:
- 4.0MHz@2.0V~3.6V selectable by code option
- Built-in Standby mode (Clock Stop mode) & Halt mode(with LCD and 32K timer on) for power saving
- Low standby current, ISTBY < 1u @3.6V, 25℃
- Low halt mode current, Ihalt < 8u @3.6V, 25℃
- Up to 24 bi-directional tri-state I/O ports
- PA0~PA7 (SEG16~23),
- PB0~1(INT0, INT1); PB2;
- PC0~PC7 (SEG24~31)
- VPP(PD5), X32O(PD3), X32I(PD2), PD1~PD0
- RFC (Resister to Frequency Converter)
- Uses 12-bit timer (Timer1) counter
- PC7 as RFC input, PC6/5/4 as RFC output
- LCD configurations: 4 coms x 32 segs (MAX)
- Frame rate is 85Hz.
- LCD 1/2, 1/3 bias; 1/2, 1/3, 1/4 duty; VLCD = VDD
- Four timers
- Basic timer provides Fosc/4194304 watch dog source;
- Timer0 is a general purpose 8-bit timer with input clock selectable;
- Timer1 is a general purpose 12-bit timer with input clock selectable
- 32K timer is a time base wakeup source with frequency selectable
- 10 interrupt sources
- TM0O, TM1O, CPUDiv1K, CPUDiv4K, CPUDiv32K, CPUDiv2M, TBHF, TBLF, EXTINT1 and EXTINT0 interrupts
- Wakeup source
- Key (Port B/C/D) change wakeup
- 32K time base wakeup(TBHF/TBLF)
- LVD (Low voltage detect)
Sense VDD voltage@ 2.1V / 2.4V (register option)
Note1: TBHF: 128Hz, 256Hz, 512Hz or 1KHz
Note2: TBLF: 2Hz, 4Hz, 8Hz or 16Hz
Data Sheet
GPL812P01CV10_ds.pdf
