產品資訊 - GPL83205A

General Description

The GPL83205A, an 8-bit microprocessor, features 512K bytes ROM and 1536 bytes working RAM, 16 I/Os, interrupt/wake-up controller, two 16-bit timers, one SPI interface, a 12-bit PWM driver for driving speaker directly, hardware touch function and automatic display controller/driver for mono LCD.  The GPL83205A contains up to 48 segments and 32 commons, forming a maximum of 1536 dots LCD resolution.  The GPL83205A operates a wide voltage range from 2.3V through 5.5V, coupled with Low Voltage Reset function to assure system functions properly when power drops below certain level.  The microprocessor can implement software for audio processing, functional control, and others.  The GPL83205A carries a high performance SPU voice engine to achieve 8-channel voice with ADPCM or TAG data.  It can produce attractive and high resolution sound easily.  In addition, the GPL83205A features one 12-bit PWM driver for driving speaker directly.  Its large memory can be used to store both program and audio data.  There is a Serial Peripheral Interface (SPI) controller built-in to facilitate communicating with other devices.  Furthermore, a SLEEP (power-down) function is also built-in to extend battery life.  The GPL83205A is designed with state-of-the-art technology to fulfill LCD application needs, especially for hand-held products.

Features

• 8-bit micro-processor
• 512K-byte ROM
• 1536-byte SRAM
• Operating voltage: 2.3V – 5.5V
• CPU operating speed:
• 0MHz @ 2.7V – 5.5V
• 0MHz @ 2.3V – 5.5V
• Programmable CPU clock: /2, /4, /8, /16, /32, /64 and /128 clock frequency
• Six wakeup sources
• 20 IRQs & 4 NMI Interrupts
• Internal built-in regulator to supply core power (3.3V, for 3-battery application). Also the internal built-in regulator can be turned off and the external 3.6V power is used to supply core power (for 2-battery application)
• SPU(Sound Processing Unit) engine
• Supports 4-bit ADPCM data format and TAG mode
• Transforms 4-bit ADPCM data to 12-bit data to play high quality sound
• Supports special tag, such as Silence Tag and Event tag
• One software channel with noise filter for high quality sound
• Programmable LCD driver
• Up to 48 segments and 32 commons, forming a maximum of 1536 dots LCD resolution
• Supports from 1/4 duty up to 1/32 duty
• 192-byte dedicated LCD RAM
• Supports normal type-B and type-C LCD waveform with or without key scan
• Built-in voltage regulator to generate VLCD for LCD driver
• 32-level contrast control (VLCD=4.1V~7.2V)
• Power saving SLEEP mode
• Low Voltage Detector

8-level (2.2V/2.3V/2.4V/2.6V/2.8V/3.0V/3.3V/3.6V) voltage detector

• Low Voltage Reset
• Peripherals
• 32 I/O pins (PA[7:0], PB[7:0], PD[7:0], PE[7:0])

Dedicated I/Os: PA[7:0], PB[7:0]

Shared pin I/Os:

PD[7:0]/SEG[7:0]

PE[7:0]/SEG[15:8]

• Eight I/Os with high sink current for LED application
• Key wake-up/interrupt function
• Built-in 32.768KHz oscillator circuit for real time clock function (X’tal or internal R-osc)
• Built-in R-oscillator (external resistor is needed) or PLL for system operating clock
• Internal time base generator
• Two 16-bit reloadable timer/counters
• Watchdog timer
  • 12-bit PWM driver for driving speaker directly
  • IR output
  • Hardware PWMIO
  • One SPI serial interface I/Os
  • Hardware Touch function
  • One set built-in comparator
• Powerful 8-ch Sound Processing Unit (SPU)
  • Variable tone-color sampling rate: max = 96KHz @ SPU_clock = 24MHz
• 8-voice polyphony
  • Supports ADPCM tone-color table