Density (bit) | Working Voltage(V) | Operating frequency (MHz) |
---|---|---|
128M | 2.7~3.6 | 133 |
The GPR25L12806F(128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#/ RESET#). The Dual I/O data is transferred with speed of 208Mbits/s and the Quad I/O & Quad output data is transferred with speed of 416Mbits/s.
??28M-bit Serial Flash
-16384K-byte
-256 bytes per programmable page
?tandard, Dual, Quad SPI
-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#/ RESET#
-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#/ RESET#
-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
?igh Speed Clock Frequency
-104MHz for Standard and Dual SPI fast read with 30PF load
-Dual I/O Data transfer up to 208Mbits/s
-Quad I/O Data transfer up to 416Mbits/s
?oftware/Hardware Write Protection
-Write protect all/portion of memory via software
-Enable/Disable protection with WP# Pin
-Top/Bottom Block protection
?llows XIP (execute in place) Operation
-Continuous Read With 8/16/32/64-byte Wrap
?inimum 100,000 Program/Erase Cycles
?ata Retention
-20-year data retention typical
?ast Program/Erase Speed
-Page Program time: 0.6ms typical
-Sector Erase time: 50ms typical
-Block Erase time: 0.2/0.3s typical
-Chip Erase time: 60s typical
?lexible Architecture
-Uniform Sector of 4K-byte
-Uniform Block of 32/64k-byte
?ow Power Consumption
-25mA maximum active current
-5uA maximum power down current
?dvanced Security Features
-3x1024-Byte Security Registers With OTP Locks
?ingle Power Supply Voltage
-Full voltage range:2.7~3.6V
?ackage Information
-SOP8 (208mil)