GPM32F0114B
| ROM Type | Working Voltage(V) | Speed(MHz) | ROM(Byte) | RAM(Byte) | ADC(12bit) | Motor BLDC | Motor Sensor-less | Motor SIN | TMR/CNT | CPU OSC. INT | CPU OSC. X'TAL | OP / Comparator | PWM | MDU/CORDIC | LVR | IO No. | UART/SPI/12C | PreDriver for SOC | PKG |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flash | 2.3~5.5 | 92 | 32K | 8K/4K | 16-ch/2set | V | V | V | 4 | V | - | 4/2 | 10 | V | V | 38/25 | 3/1/2 | - | LQFP48 SSOP28 |
General Description
The GPM32F0114B series of industrial microcontroller is based on the ARM® Cortex®-M0 processor core and operates at a frequency of up to 92MHz. The GPM32F0114B series are optimized for motor control, power conversion, home appliances and general purpose applications. GPM32F011xB operates in the -40°C to 105°C temperature range from 2.3V to 5.5V wide voltage supply.
Features
- CPU Subsystem
- CPU Core
- ARM® Cortex®-M0 32-bit CPU (92MHz max) with Code Fetch Accelerator
- Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
- 24-bit SysTick timer
- Single cycle 32bit multiplier instruction
- MATH Co-processor (MATH)
- 24-bit trigonometric calculation (CORDIC)
- Hardware Divider
- CPU Core
- Memories
- 8K bytes SRAM (Up to 12KB is configurable)
- 4K bytes System Memory for loader
- 60K/32K bytes (max) Program Memory
- Configurable Data Memory supported
- Clock Management
- Internal oscillator: 8MHz±5%@ 2.3V~5.5V / -40°C~105°C
- Internal oscillator: 32KHz±50%
- External crystal oscillator : 4MHz ~ 12MHz
- Phase Lock Loop : 92MHz(max)
- The PLL output frequency based on M/N Coefficient
- Power Management
- In SLEEP mode: Only the CPU stopped.
- In DEEPSLEEP mode: All clocks are stopped.
- Reset Management
- Power On Reset (PORRESETn)
- PAD Reset (PADRESETn)
- Master Reset (MRESETn)
- System Reset (SRESETn)
- Analog peripherals
- Up to 2 A/D Converters with 1M SPS and 16 analog inputs
- Up to 2 fast Analog Comparators (ACMP)
- Up to 4 Operational Amplifier (OPA)
- With Unity gain frequency 20 MHz
- Differential or Single input available
- Die Temperature Sensor
- Low Voltage Reset (2.1V, 2.7V, 3.2V, 4.2V)
- Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
- Industrial Control Peripherals
- 16-bit Capture/Compare/PWM Units 4 (CCU4)
- 16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)
- For motor control and power conversion
- 24-bit Position Interfaces (POSIF)
- For hall and quadrature encoders and motor positioning
- System Control
- Up to 8 channels DMA controller
- Support peripheral : Timers, eCCU6, CCU4, ADCs, I2Cs, UARTs, SPIs
- Watchdog Timer (WDG) for safety sensitive applications
- System Management Unit (SMU) for system configuration and control
- 96-bit Unique ID
- Up to 8 channels DMA controller
- I/O Ports
- Max 41 fast multifunction bi-directional I/Os
- All I/Os support external interrupt vectors
- Built-in pull-up/pull-down resistor
- I/O ports with 15mA/20mA source/sink current
- Max 41 fast multifunction bi-directional I/Os
- Timer
- Up to 2 16bit general timer
- Communication peripherals
- Up to 2 I2C
- Up to 2 SPI (Clock 24MHz max)
- Up to 3 UART
- Full duplex & half duplex supported
- Security
- 4 Security Levels supported
- Debug System
- ARM serial wire debug (SWD)
- 4 hardware breakpoints
- 2 watch points
- Operation Temperature
- -40°C to 105°C
- Reliability
- HBM 4KV
- MM 400V
- CDM 500V
- Package
- LQFP48, SSOP28
Application / Engineering Note
AN0218-GPM32F011xB UART(Rx模式)資料格式設定注意事項V10.pdf
AN0219-GPM32F011xB eCCU6 PWM設定注意事項V10.pdf
User Guide
GPM32FV10_M0 Flash_user(english version).pdf
GPM32FV10_M0 Flash_user(chinese version).pdf
GPM32F011XBV10_UART (Rx Mode)_user(english version).pdf
GPM32F011XBV10_eCCU6 PWM_user(english version).pdf
GPM32F011XBV10_Sensored FOC Control of PMSM Using GPM32F011xB_user(english version).pdf
GPM32F011XBV10_Sensorless SMO Control of PMSM Using GPM32F011xB_user(english version).pdf
Please input the answer before download.