Products - GPR25L162B

General Description

The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.

Features

• Single Power Supply Operation
  • 2.7 to 3.6 volt for read, erase, and program operations
• Serial Peripheral Interface compatible -- Mode 0 and Mode 3
• 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (Dual Output mode) structure
• 512 Equal Sectors with 4K byte each
  • Any Sector can be erased individually
• 32 Equal Blocks with 64K byte each
  • Any Block can be erased individually
• Program Capability
  • Byte base
  • Page base (256 bytes)
• Latch-up protected to 100mA from -1V to VCC +1V
• GPR25L162B is compatible with MX25L1606E
• High Performance
  • Fast access time: 86MHz serial clock
  • Serial clock of Dual Output mode : 80MHz
  • Fast program time: 1.4ms(typ.) and 5ms(max.)/page
  • Byte program time: 9us (typical)
  • Fast erase time: 60ms(typ.) /sector ; 0.7s(typ.) /block
• Low Power Consumption
  • Low active read current: 25mA(max.) at 86MHz
  • Low active programming current: 20mA (max.)
  • Low active erase current: 20mA (max.)
  • Low standby current: 25uA (max.)
  • Deep power-down mode 5uA (typical)
• Typical 100,000 erase/program cycles
• 20 years of data retention
• PACKAGE
  • 8-pin SOP (150mil)
  • 8-pin SOP (200mil)