Genealplus Website requires enable JavaScript!


How to enable JavaScript? Look here

凌通科技股份有限公司

网站及个人资料使用同意条款


欢迎使用Generalplus网站 (以下简称“本网站”)。在您注册前,请详细阅读以下内容,若您同意遵守以下条款以及我们的隐私政策,请勾选『我已了解上述条款』并继续注册。如果您不同意这些条款的任何部分,请立即停止使用本网站。
本网站的使用须遵守以下使用条款:
  • 本网站的内容仅供参考及一般使用。
  • 本网站将基于数据处理及信息供应服务的目的(以下简称“目的”),收集、处理和使用注册者的个人信息,包括但不限于注册者的姓名、国籍、生日、身份证号码、电话号码、电子邮件地址、职业、职称。注册者有权查询、阅览、要求提供复制本、补充或更改个人信息,并有权于本条款目的消失后,通知本网站停止收集、处理、利用或删除个人信息
  • 本网站可能会使用cookies来储存浏览偏好,若注册者允许使用cookie,本网站会储存部份个人浏览偏好供本网站或中介第三方使用。
  • 本网站对其所提供的信息之准确性、及时性、完整性或适用性均不提供任何保证及担保,敬请知悉本网站所提供的内容有可能包含了不准确或错误。于法律规范内,本网站排除不准确或错误的责任。
  • 注册者对于使用本网站上任何信息的结果,完全由注册者自行承担,本网站不承担任何责任。注册者有责任确保经由本网站取得的任何产品、服务或信息是否满足特定需求。
  • 本网站所有信息:包含设计、布局、外观、图形、档案…等,皆需被授权。除版权声明所述的情形外,禁止复制、再制及未被授权之传播,版权声明亦被视为本条款的一部份。
  • 注册者操作本网站而产生的所有相关版权信息,其版权归属仍属本网站,并不代表版权移转。
  • 若使用本网站未经授权信息(包含设计、布局、外观、图形、档案…等),若发生侵权伤害,本网站可提出告诉,并发出法律诉讼,包括民事损失索赔或刑事诉讼。
  • 本网站内可能含有其他网站的连接,此类连接是为了提供进一步的信息。本网站不保证此类网站是否具危害性,及对于连接的网站不具担保责任。
  • 本网站可不经个别通知修改本条款的内容,任何修订后的结果,直接公布于本网站上。若注册者不同意任何修改,请停止使用本网站,并行使应有权利:要求本网站停止收集、处理或使用个人资料。若未提出异议时,则视同注册者已同意条款之修正,并已知悉。
  • 对本网站的使用以及因使用本网站而引起的任何争议,均受台湾法律的约束。


版权声明
本网站及其内容和图片均为Generalplus Technology Inc.版权所有 - cGeneralplus Technology Inc. 2016.保留所有权利。

除了以下情形外,禁止以任何形式重新分发或复制部份或全部的内容:
  • 在个人和非商业用途情形下,可以打印或下载
  • 在认知网站来源的情形下,可以将内容复制到个人第三方以供个人使用

除非获得本网站的明确书面同意,否则注册者不得散布或商业利用该内容,也不得将其传输或储存至其他网站或其他形式的电子文件系统。







* : 必填
*所属区域
*Email 电子邮箱
*密码
*确认密码
*名字
*姓氏
电话
职业
公司名称
项目信息
项目中主要使用的IC
500字以內
*检核码



旧密码

新密码

确认密码

GPM4

凌通科技 | GPM4
GPCE4   |   GPL833

GPM4

200MHz+
Powered by ARM's Cortex-M4F.
GPM4 equips a strong ARM Cortex-M4F, a high performance embedded core processor with DSP instructions developed to address digital signal control markets that demand an efficient, easy-to-use blend of control and signal processing capabilities. The turbo-boost operating speed up to 200MHz plus makes GPM4 stand out from the crowd in its segment.
128/256
Fast and Faster
GPM4, along with power of Cortex-M4F, is embedded a 128KB SRAM to boost the data access speed instantly and a 256Mb DDR SDRAM (Double Data Rate SDRAM) to transfer large amount of data, especially image and video, nearly twice faster than the traditional SDRAM in speed.
H.264
High Definition, High Standard
GPM4 features a H.264 baseline profile CODEC with a maximum of 1080p/30fps for real-time video record and playback. H.264 (or MPEG-4) represents the standard of full high definition digital video. It compresses a digital video file to a size that is only half of DVD standard to deliver the same video quality. It's been commonly employed in many of devices we use today, from a cellular phone to a full high-definition blu-ray DVD player.
1080p
Capture More Details
GPM4 is designed to deliver satisfied video quality with a full high-definition 1080p capability. Thanks to the innovation in full high-definition technology, it captures clearer and sharper images while recording; that's twice of details than a standard definition. Its specifications come with the followings:
  • ISO/IEC 10918-1 baseline JPEG.
  • High-speed decoding and encoding, up to 64M pixels.
  • Hardware Motion JPEG decoding and encoding (up to 1080p@30fps) for real-time video record and playback.
  • 1080p HDMI output with VGA or 720p to 1080p up-scaling engine.
5MEGA-pixel
5M RAW SENSOR ISP
A 5M-pixel Image Signal Processing (ISP) unit has been employed to GPM4 to perform functions such as demosaicing, focusing, exposuring, white-balance-adjustment, filting, noise reduction, and image correction, etc. It employs the histogram statistics for auto brightness and auto contrast.
MIPI
Mobile Industry Processor Interface
GPM4 is compliant with the MIPI standard, having one set of two-lane or two sets of 1-lane MIPI input and supporting video-in and CMOS sensor interface, and CCIR601/CCIR656 standard.
FACE
Face Detection
Face Detection is a type of technology widely used in today's vision computing and engineering. GPM4 comes with a face detection engine to determine the existence, location, and size of a human face, but ignores others in a scene. GPM4's face detection is programmable and expandable to further detect hands and eyes, and supports a 320 x 240 detection, YUV422 and Y-only source format, and image rotation angle in degrees of 0, 90, 180, and 270.
TFT
Each Pixel Matters
GPM4 is designed to support a TFT LCD display in order to highlight its excellence in display. TFT or called active-matrix technology performs a better resolution and color depth over other display technology to deliver crisp, sharper, and clearer image. Technically, GPM4 supports the following TFT's interface specification:
  • UPS051 (serial RGB)/ UPS052(serial RGB dummy), Parallel RGB (6-6-6, 7-7-7, 8-8-8).
  • I80 (8-bit/ 16-bit/ 18-bit system bus) I/F type.
  • CCIR601/ CCIR656 CSI standard
  • Scalar engine inside with programmable up-scaling and down-scaling factor.
PPU
Picture Processing Unit
GPM4 outfits a high-performance Picture Processing Unit (PPU) with a QVGA/VGA/D1 virtual 3D engine to accelerate graphical processing speed. Up to four text layers with 1024 sprites and 4096 extended sprites are also available as well as a maximum of 4096 palette index colors capability. With this outstanding processing unit, majority of special graphical effects can be produced the way it is expected including flipping, blending, rotation, zooming, fading, and mosaic.
Peripheral
Extendable for all kinds of possibility
GPM4 is developed to equip versatile peripherals to handle the sophistication and diversity of applications. What we list here is only part of them. To find out more about what GPM4 can do, please obtain a copy of its data sheet from the following link.
  • Universal Serial Bus (USB) 2.0 high/full speed compliance device and USB OHCI/EHCE host controller with built-in transceiver.
  • Eight 32-bit timers/counters with PWM output capability.
  • Eight channels quadrature decoder.
  • 2 of SD 2.0/MMC interfaces.
  • 3 of SPI (master/slave) interface, @ max. 24Mbps.
  • 2 of UART or IrDA interface + 3 of I2C controller
  • 4 of I2S input with 24-bit resolution @ max. 192KHz.
  • 72 Programmable I/O ports
  • 16-bit stereo DAC (2-channel) for audio playback + 16-bit stereo ADC for audio recording.
  • 12-bit SAR ADC + MIC with digital AGC (auto gain control)