产品资讯 - GPM32F0114A

General Description

GPM32F0114A series of industrial microcontrollers are based on the ARM® Cortex®-M0 processor core and operate at a frequency of up to 80MHz.  GPM32F0114A series are optimized for motor control, power conversion, home appliances and general purpose applications.  GPM32F011xA series is capable of operating at temperature from -40°C to 105°C and working voltage from 2.4V to 5.5V.

Features

• CPU Subsystem
  • CPU Core
    • ARM^® Cortex^®-M0 32-bit CPU (80MHz max) with Code Fetch Accelerator
    • Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
    • 24-bit SysTick timer
    • Single cycle 32bit multiplier instruction
  • MATH Co-processor (MATH)
    • 24-bit trigonometric calculation (CORDIC)
    • Hardware Divider
• Memories
  • 8K bytes SRAM
  • 4K bytes System Memory for loader
  • Up to 64K bytes (max) Program Memory
    • Configurable Data Memory shared with program memory
• Clock Management
  • Internal oscillator: 8MHz±5% @ 2.4V~5.5V with -40°C to 105°C
  • Internal oscillator: 32KHz±50%
  • External crystal oscillator : 4MHz ~ 12MHz
  • Phase Lock Loop : 80MHz(max)
    • The PLL output frequency based on M/N Coefficient
• Power Management
  • In SLEEP mode: Only the CPU stopped.
  • In DEEPSLEEP mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog peripherals
  • Up to 2 A/D Converters with 1M SPS and 16 analog inputs
  • Up to 4 fast Analog Comparators (ACMP)
  • Up to 3 Operational Amplifier (OPA) with Unity gain frequency 20 MHz
  • Regulator with configurable output voltage (2.9V, 3.1V, 3.3V, 3.5V)
  • Temperature Sensor
  • Low Voltage Reset (2.2V, 2.7V, 3.2V, 4.2V)
  • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
• Industrial Control Peripherals
  • Up to 2 Capture/Compare Units 4 (CCU4)
  • Up to 2 Capture/Compare Units 8 (CCU8)
  • Up to 2 Position Interfaces (POSIF)
• System Control
  • Up to 3 channels DMA controller
  • Watchdog Timer (WDG) for safety sensitive applications
  • System Management Unit (SMU) for system configuration and control
  • 96-bit Unique ID
• I/O Ports
  • Max 55 multifunction bi-directional I/Os
    • Each incorporate with pull-up resistor, pull-down resistor, output high, output low or floating input, depending on programmer’s settings on the corresponding registers
  • I/O ports with 15mA/20mA source/sink current
• Timer
  • Up to 2 16bit general timer
• Communication peripherals
  • Up to 2 I2C
  • Up to 2 SPI
  • Up to 3 UART
• Debug System
  • ARM serial wire debug (SWD)
  • Supporting up to 4 hardware breakpoints
  • Supporting up to 2 watch points
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • ESD HBM 4KV
  • CDM 500V
  • EFT 4KV
• Package
  • LQFP48
  • LQFP64