产品资讯 - GPM32F9019D

General Description

GPM32F9019D is an industrial microcontroller which based on the ARM^® Cortex^®-M0 processor core. It integrates WPC QI standard of Version V1.3 and has high performance in PACKET(signal) Demodulation. Several protection approach are included to avoid system run into abnormal condition such as overcurrent, low voltage, thermal protection, Q-Factor protection, and offset protection.

Features

• CPU Subsystem
  • CPU Core
• ARM^® Cortex^®-M0 32-bit CPU with Code Fetch Accelerator
• Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
• 24-bit SysTick timer
• Single cycle 32bit multiplier instruction
  • MATH Co-processor (MATH)
• 24-bit trigonometric calculation (CORDIC)
• Hardware Divider
• Memories
  • 8K bytes SRAM (Up to 12KB is configurable)
  • 4K bytes System Memory for loader
  • 60K bytes (max) Program Memory
• Configurable Data Memory supported
• Clock Management
  • Internal oscillator: 8MHz±5%@ 2.3V~5.5V / -40°C~105°C
  • Internal oscillator: 32KHz±50%
  • External crystal oscillator : 4MHz ~ 12MHz
  • Phase Lock Loop : 92MHz(max)
• PLL output frequency based on M/N Coefficient
• Power Management
  • In SLEEP mode: Only the CPU stopped.
  • In DEEPSLEEP mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog peripherals
  • Up to two A/D Converters with 1M SPS and 16 analog inputs
  • Up to two fast Analog Comparators (ACMP)
  • Up to four Operational Amplifiers (OPA)
• With Unity gain frequency 20 MHz
• Differential or Single input available
  • Die Temperature Sensor
  • Low Voltage Reset (2.1V, 2.7V, 3.2V, 4.2V)
  • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
• System Control
  • Up to 8 channels DMA controller
• Support peripheral : Timers, eCCU6, CCU4, ADCs, I²Cs, UARTs, SPIs
  • Watchdog Timer (WDG) for safety sensitive applications
  • System Management Unit (SMU) for system configuration and control
  • 96-bit Unique ID
• I/O Ports
  • Max 39 fast multifunction bi-directional I/Os
• All I/Os support external interrupt vectors
• Built-in pull-up/pull-down resistor
• I/O ports with 15mA/20mA source/sink current
• Timer
  • Up to two 16-bit general timer
• Communication peripherals
  • Up to two I2C
  • Up to two SPI (Clock 24MHz max)
  • Up to three UART
• Full duplex & half duplex supported
• Security
  • Four Security Levels supported
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • HBM 4KV
  • MM 400V
  • CDM 500V
• Package
  • LQFP48