GPM8F3332B 
| Package | Memory (Byte) Flash/ EEPROM | Memory (Byte) RAM IDM/XDM | Timer CCP 16bit | CPU Iosc Mhz | CPU Xtal Mhz | Peripheral IO | Peripheral PWM | Peripheral OP | Peripheral CMP | Peripheral ADC 12b | Peripheral UART/SPI/I2C | Peripheral PreDriver for SOC | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| QFN32 | 32K | 256/1K | 3 | 65.3824 | 8 | 24 | 2 | 3 | 2 | 13 | 1/0/1 | - | V=2.4~5.5V LVR:12.4V, 2.8V, 3.2V, 4.2V |
Features
- CPU
- High speed and high performance 1T 8051-based CPU
- 100% software compatible with industry standard 8051
- Pipeline RISC architecture enables to execute instructions 10 times faster than standard 8051
- Up to 65.3824MHz clock operation
- High speed and high performance 1T 8051-based CPU
- Memories
- 1K bytes XRAM
- 256 bytes internal Data Memory (IDM) SRAM
- 32K bytes FLASH with high endurance
- Minimum 100,000 program/erase cycles
- Minimum 10 years data retention
- 512 Byte page size
- Programmable read only level for software security
- Clock Management
- Internal oscillator: 8MHz±2% @ 4V~5.5V
- Internal oscillator with PLL : 65.3824 / 63.85 / 60.019 / 52.357 MHz
- Crystal input with 8MHz
- Internal oscillator: 32KHz ± 50% @ 4V~5.5V
- Power Management
- One Sleep mode for power saving
- Interrupt Management
- 12 interrupt sources
- Two external interrupt sources
- Reset Management
- Power On Reset (POR)
- Low Voltage Reset (LVR)
- Pad Reset (PAD_RST)
- Watchdog Reset (WDT_RST)
- Software Reset (S/W_RST)
- FLASH Access Error Reset (ADDR_ERR_RST)
- Programmable Watchdog Timer
- A time-base generator
- An event timer
- System supervisor
- Three OPs
- Includes Internal gain
- Includes resistance between OP_O and CMP_N/ CMP_P input path
- Two Comparator
- Programmable hysteresis and de-bounce select
- Programmable input source select.
- I/O Ports
- M 24 multifunction bi-direction I/Os
- Each incorporates with pull-up resistor, pull-down resistor, output high, output low , output driving capability and floating input, determined by user’s settings at the corresponding registers
- I/O ports with 15mA or 8mA current sink @ VDD = 5V
- I/O ports with 15mA or 8mA current drive @ VDD = 5V
- Two 16-bit Timers/Counters (Timer 0/1)
- Timer mode with selectable clock source
- Auto reload 8-bit timers
- Three Powerful Timers: TimerA / TimerB / TimerC, with 16-bit Compare / Capture / PWM Unit
- Timer mode with selectable clock source
- Auto-reload 16-bit timers
- Event capturing
- Pulse width modulation and measurement
- TimerA providing 4-channel PWM/Capture
- TimerB providing 2-channel PWM/Capture
- TimerC providing 2-channel Capture
- UART0
- One synchronous mode
- Three asynchronous modes
- I2C (master / slaver mode)
- Programmable master I2C clock frequency
- Max I2C clock: 400 KHz
- A/D Converter
- One 13-channel 12-bit resolution ADC
- Supports programmable sample & hold and ADC clock function
- Control independent per set
- Internal VSS channel
- Supports Offset calibrate
- Supports direct memory access from ADC to XRAM
- Built-in Low Voltage Reset
- Trigger level: 2.4V, 2.8V, 3.2V, 4.2V
- Built-in Low Voltage Detect
- Programmable level: 2.6V, 3.0V, 3.4V, 4.4V
- On-chip Debug Unit
- C-language compatible development tool
Data Sheet
GPM8F3332BV01_brief.pdf
Tools
8051 ICE Driver - 1.2.7
请输入答案后下载档案
