产品资讯 - GPM8F3733A

General Description

GPM8F3733A, a series of highly integrated microcontrollers, integrates a pipelined 1T 8051 CPU, 2K-byte XRAM, 256-byte IDM SRAM and 32K-byte program FLASH. It also has up to 27 programmable multi-functional I/Os, Timer0/1/2, TimerA/B, UART0/1, SPI, I2C, Capacitive Touch sensor (CTS) and a 12-bit ADC for general-purpose application. It operates over a wide voltage range of 2.0V - 5.5V, under temperature condition from -40??through 85?? with two power management modes.

Features

• CPU
  • High speed & high performance 1T 8051
    • 100% software compatible with industry standard 8051
    • Pipeline RISC architecture executing instructions 10 times faster than standard 8051
  • Up to 32MHz clock operation
• Memory
• GPM8F3733A:
  • 2K bytes XRAM
  • 256 bytes internal Data Memory (IDM) SRAM
  • Up to 32K bytes FLASH with high endurance
• GPM8F3733A FLASH
• Minimum of 100K progam/erase cycles
• Minimum of 10 years data retention
• Page size 1KB
• Clock Management
  • Internal oscillator: 32MHz±2% @ 0V~5.5V
• Slow Clock
  • Internal oscillator: 16KHz±50%@ 0V~5.5V
• Power Management
  • One STOP mode for power saving
  • One HALT mode for slow clock operation
• Interrupt Management
• GPM8F3733A:
  • Up to 16 internal interrupt sources
  • Up to 5 external interrupt sources
  • Up to 14 keyboard Interrupt sources
• Reset Management
  • Power On Reset (POR)
  • Low Voltage Reset (LVR)
  • Pad Reset (PAD_RST)
  • Watchdog Reset (WDT_RST)
  • Software Reset (S/W_RST)
  • FLASH Related Error Reset (FLASH_ERR_RST)
• Programmable Watchdog Timer
  • A time-base generator
  • An event timer
  • System supervisor
• I/O Ports
• GPM8F3733A :
  • 27 multifunction bi-direction I/Os
• GPM8F3733A :
  • Each incorporates with pull-up resistor, pull-down resistor, output high, output low or floating input, depending on programmer’s settings on the corresponding registers
  • I/O ports with 20mA current sink
  • I/O ports with 20mA current drive
  • P0[7:0] supports high 120mA current sink
• Two 16-bit Timer/Counters (Timer 0/1)
  • Timer mode with clock source selectable
  • Auto reload 8-bit timers
• One Powerful Timer2 with 16-bit Compare/Capture Unit
  • Timer mode with clock source selectable
  • Auto reload 16-bit timers
  • Event capturing
  • Digital signals generator
  • Pulse width modulation and measurement
• Two 16-bit Timers (Timer A/B)
  • Timer mode with system clock source
  • Auto reload 16-bit timers
• UART0/1
  • One synchronous mode
  • Three asynchronous modes
• SPI (master/slave mode)
  • Programmable phase and polarity of master clock
  • Programmable master clock frequency
  • Auto read/write function
  • Max SPI clock: 16MHz (F_OSC /2) @32MHz
• I2C (master/slave mode)
  • Programmable master I2C clock frequency
  • I2C clock: 800KHz @32MHz

                 400KHz @16MHz

• A/D Converter
• GPM8F3733A:
  • One 9-channel 12-bit resolution ADC
• Capacitive Touch sensor unit
• GPM8F3733A :
  • Up to 26-channel Capacitive Touch sensor
• GPM8F3733A :
  • Relaxation Oscillator mode
• One 16-bit Timer (Timer A) to count the desired number of CTS cycles
• One 16-bit Timer (Timer B) to measure the time duration for the desired number of CTS cycles occurred.
  • CTC mode
• One 16-bit Timer (Timer B) to measure the time duration for the CTC_DUTY.
  • CTA mode
• One 16-bit Timer (Timer A) to count the CTA cycle One 16-bit Timer (Timer A) to count the CTA cycle
• One 12-bit ADC to measure the Cs PAD
• Built-in Low Voltage Reset
  • Trigger level: 1.9v/2.2v/2.7v/3.6v
• Built-in low Voltage Detect
  • Programmable level: 2.1V, 2.4V, 2.9V, 3.8V
• On-chip Debug Unit
• C compatible Development Tools