General Description
The GPCV2159A, a highly integrated SoC processor for vehicle camera recorder, is based on a high performance and power efficient ARM1176JZFS core operating at up to 702MHz and is enhanced with image, video processing, power saving, and system peripherals.
The high-speed MJPEG engine is capable of supporting video compression up to 1080p/30fps. Other main features include a high-performance Image Signal Processing (ISP) hardware-accelerating pipeline to boost the conventional raw-data CMOS sensor up to 5M pixels and an HDMI Tx for HDTV output to deliver high-resolution graphics.
ARM1176JZFS processor is designed to connect with various types of memory card interfaces such as SD, SDHC, SDIO, and MMC.
These fully featured peripherals and functions make GPCV2159A one of the best vehicle camera SoC solutions in the industry- making your products more competitive in today's market.
Features
-
High performance CPU + HW video codec architecture
-
ARM1176JZFS CPU with 32KB I-cache and 32KB D-cache, Vector Floating Point (VFP) Coprocessor, embedded JTAG ICE, and working frequency up to 600MHz
-
HW video decoder. Supports JPEG/MJPEG/MPEG4 SP/ASP, H.263, H.264 BP/MP/HP. All format support up-to 1080p resolution.
-
HW video encoder. Supports JPEG/MJPEG (max. 4672x3504 size), H.264 BP/MP/HP up-to 1080P 30fps/720P 60fps.
-
Video-in & CMOS sensor interface, Two single-lane MIPI sensor interface (max. 768Mbps data rate, only one can active at the same time) and CCIR601/ CCIR656 standard support
-
Image signal processing hardware-accelerating pipeline
-
High quality scalar engine
-
AES-128 encryption and decryption
-
Display engine
-
TFT-LCD controller
-
UPS051 / UPS052 (serial RGB)
-
Parallel RGB (5-6-5, 6-6-6, 8-8-8)
-
I80 (8-bit/16-bit system bus) I/F type
-
CCIR601/CCIR656
-
Digital Timing Controller for TFT-LCD drivers
-
TV encoder with VDAC output
-
NTSC/PAL output
-
De-flicker function
-
Real time OSD, which also supports OSD scaling up
-
Real time (on screen) scalar engine inside to fit the display screen
-
Programmable RGB gamma correction
-
Color convert matrix for display
-
Built-in 1-channel LVDS transmitter. Support RGB666/RGB888 up-to 1366x768 resolution
-
Watchdog timer
-
Real-time clock
-
Programmable general I/O ports (GPIO) with pull-high/low control
-
Two USB_PHY interface with one built-in USB device controller and two USB EHCI/OHCI host controllers. Both USB_PHY can switch to host or device controller.
-
UART interface with baud rate up to 1.8432Mbps and 115.2Kbps
-
SPI (master) interface
-
I2C interface
-
I2S master/slave
-
SD/SDHC/SDIO/MMC card interface, which also supports eMMC interface
-
Stereo Sigma/Delta DAC for audio playback
-
Stereo line-in and Microphone line-in for audio recorder
-
10-bit ADC with 5 line-in channels, which also supports Touch panel application
-
BGA224 package