Products - GPM32F1005G

General Description

GPM32F1005G series is based on the ARM^® Cortex^®-M0 processor core and operates at a frequency of up to 80MHz. The GPM32F1005G series devices are optimized for motor control, power conversion, home appliances and general purpose applications.  GPM32F1005G operates in the -40°C to 105°C temperature range from 2.3V to 5.5V wide voltage supply.

Features

• CPU Subsystem
  • CPU Core
• ARM^® Cortex^®-M0 32-bit CPU (80MHz max)
• Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources
• 24-bit SysTick timer
• Single cycle 32bit multiplier instruction
  • MATH Co-processor (MATH)
• 24-bit trigonometric calculation (CORDIC)
• Hardware Divider
• Memories
  • 6K bytes SRAM
  • 4K bytes System Memory for loader
  • 32K bytes (max) Program Memory
• Configurable Data Memory supported
• Clock Management
  • Internal oscillator: 8MHz±5%@ 2.3V~5.5V / -40°C~105°C
  • Internal oscillator: 32KHz±50%
  • Phase Lock Loop : 80MHz(max)
• The PLL output frequency based on M/N Coefficient
• Power Management
  • In SLEEP mode: Only the CPU stopped.
  • In DEEPSLEEP mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog peripherals
  • Up to two A/D Converters with 1M SPS and 16 analog inputs
  • Up to two fast Analog Comparators (ACMP)
  • Up to two Operational Amplifier (OPA)
• With Unity gain frequency 10 MHz
  • Die Temperature Sensor

• Low Voltage Reset (2.2V, 2.7V, 3.2V, 4.2V)
• Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)

• Industrial Control Peripherals
  • 16-bit Capture/Compare/PWM Units 4 (CCU4)
  • 16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)
• For motor control and power conversion
  • 24-bit Position Interfaces (POSIF)
• For hall and quadrature encoders and motor positioning
• System Control
  • Up to 8 channels DMA controller
• Support peripheral : Timers, eCCU6, CCU4, ADCs, I²Cs, UARTs, SPIs
  • Watchdog Timer (WDG) for safety sensitive applications
  • System Management Unit (SMU) for system configuration and control
  • 96-bit Unique ID
• I/O Ports
  • Max 21 fast multifunction bi-directional I/Os
• All I/Os support external interrupt vectors
• Built-in pull-up/pull-down resistor
• I/O ports max with 16mA/16mA source/sink current
• Timer
  • Up to 2 16bit general timer
• Communication peripherals
  • Up to one I2C
  • Up to one SPI (TBD max)
  • Up to two UARTs
• Full duplex & half duplex supported
• Security
  • Four Security Levels support
• Debug System
  • ARM^® serial wire debug (SWD)
  • Four hardware breakpoints
  • Two watch points
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • HBM 4KV
  • MM 400V
  • CDM 500V
• Package
  • SSOP24