Products - GPM32F1307CL

General Description

The GPM32F1307CL series of industrial microcontroller is based on the ARM® Cortex®-M0 processor core and operates at a frequency of up to 96MHz. The GPM32F1307CL series are optimized for motor control, power conversion, home appliances and general purpose applications. GPM32F1307CL series operates in the temperature range from -40°C to 105°C, and the wide voltage supply is from 2.2V to 5.5V.

 

Features

• CPU Subsystem
  • CPU Core
• ARM^® Cortex^®-M0 32-bit CPU (Max: 96MHz)
• Nested Vectored Interrupt Controller (NVIC) with 32 Interrupt Sources
• 24-bit SysTick Timer
• Single Cycle 32-bit Multiplier Instruction
  • MATH Co-Processor (MATH)
• 24-bit Trigonometric Calculation (CORDIC)
• Hardware Divider
• Square Root Operation
• Memories
  • 16K bytes SRAM
  • 8K bytes System Memory for Loader
  • Up to 120K bytes (Max) Program Memory
• Configurable Data Memory shared with program memory.
• Clock Management
  • Internal Oscillator: 8MHz.
  • Internal Oscillator: 32KHz ± 50%
  • External Crystal Oscillator: 4MHz / 8MHz
  • Phase Lock Loop : 96MHz (Max)
• The PLL output frequency is based on M Coefficient.
• Power Management
  • In SLEEP Mode: Only the CPU is stopped.
  • In DEEPSLEEP Mode: All clocks are stopped.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• Analog Peripherals
  • Up to 2 A/D Converters with 2.1M SPS and 16 analog inputs.
  • Up to 2 fast Analog Comparators (ACMP).
  • Up to 4 Operational Amplifiers (OPA).
• With Unity gain frequency 20MHz.
• Both Differential and Single input are available.
  • Die Temperature Sensor
  • Low Voltage Reset (2.2V, 2.7V, 3.2V, 4.2V)
  • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
• Industrial Control Peripherals
  • 16-bit Capture/Compare/PWM Units 4 (CCU4)
  • 16-bit Enhanced Capture/Compare/PWM Units 6 (eCCU6)
• For motor control and power conversion.
  • 24-bit Position Interfaces (POSIF)
• For hall and quadrature encoders and motor positioning.
• System Control
  • DMA controller which has up to 8 channels.
• Supported peripheral: TMUs, eCCU60, CCU40, ADCs, I²Cs, UARTs, and SPIs.
  • Watchdog Timer (WDG) for safety sensitive applications.
  • System Management Unit (SMU) for system configuration and control.
  • 96-bit Unique ID
• I/O Ports
  • Max 44 multifunction bi-directional I/Os.
• All I/Os support external interrupt vectors.
• Built-in Pull-Up/Pull-Down Resistor
• I/O ports with 20mA source/sink current.
• Timer
  • Up to two 16-bit general timers.
• Communication Peripherals
  • Up to 1 I2C.
  • Up to 2 SPI.
  • Up to 3 UART.
• Full duplex and half duplex are supported.
• Single Wire Half Duplex is supported.
• LIN (Local Interconnect Network) bus communication is supported.
• Security
  • 4 Security Levels are supported.
• Debug System
  • ARM Serial Wire Debug (SWD)
  • 4 Hardware Breakpoints
  • 2 Watch Points
• Operation Temperature
  • -40°C to 105°C
• Reliability
  • HBM 4KV / MM 400V / CDM 500V
• Package
  • LQFP48, SSOP28, SOP16