Products - GPM32F6006V

General Description

The GPM32F6006X series of industrial microcontroller is based on the ARM® Cortex® -M0 processor core and operates at a frequency up to 32MHz. The GPM32F6006X series are optimized for high precision mixed signal measurement, home appliances and general purpose applications. GPM32F6006X operates in the -40°C to 85°C temperature range from 2.2V to 5.5V wide voltage supply.

Features

• CPU Subsystem
  • CPU Core
    • ARM^® Cortex^®-M0 32-bit CPU (32MHz max) with Code Fetch Accelerator
    • Nested Vectored Interrupt Controller (NVIC) with 32 Interrupt Sources
    • 24-bit SysTick Timer
    • Single Cycle 32bit Multiplier Instruction
  • MATH Co-processor (MATH)
    • Hardware Divider
• Memories
  • 8K bytes SRAM
  • 4K bytes System Memory for Loader
  • Up to 60K bytes (max) Program Memory
  • Configurable Data Memory Supported
• Clock Management
  • Internal Oscillator: 32MHz±2% at 2V~5.5V / -40~85°C
  • Internal Oscillator: 35KHz±10%
  • External Crystal Oscillator: 32KHz, PPM Calibration Support
• Power Management
  • In SLEEP Mode: Only the CPU is stopped.
  • In DEEPSLEEP Mode: All clocks are stopped.
  • In Shut-Down Mode: Core power is off and RTC is alive.
• Reset Management
  • Power On Reset (PORRESETn)
  • PAD Reset (PADRESETn)
  • Master Reset (MRESETn)
  • System Reset (SRESETn)
• IO Ports
  • 54 Programmable Digital I/O Ports
• 10 Dedicated General Purpose Digital I/O Ports
• 44 programmable digital I/O ports multiplexed with LCD COM/Segment.
  • 1 Input port multiplexed with ON-KEY.
  • 2 input ports multiplexed with X32K-IN and XTAL32K_OUT.
  • I/O ports with 8mA/4mA source/sink current.
• Communication Peripherals
  • Up to 2 Serial Peripheral Interfaces (SPI)
  • Up to 3 Universal Asynchronous Receiver Transmitters (UART)
  • Up to 2 Inter Integrated Circuit Interfaces (I2C)
• Timer
  • Up to 2 16-bit General Timers
• Industrial Control Peripherals
  • 16-bit Capture/Compare/PWM Units 4 (CCU4)
  • 16-bit Enhance Capture/Compare/PWM Units 6 (eCCU6)

For motor control and power conversion.

• System Control
  • Up to 8 Channels DMA Controller
  • Watchdog Timer (WDG) for safety sensitive applications.
  • System Management Unit (SMU) for system configuration and control.
  • 96-bit Unique ID and 256-bit GeneralPlus ID.
• RTC
  • Provides independent RTC hardware IP (Power RTC) and general digital internal RTC (Internal RTC).
  • Provides independent power system in Power RTC.
  • Provides real-time clock and calendar function.
  • Supports 8 wake-up sources with different cycle and a 512-day calendar.
  • Provides 128B memory for storing backup information in Power RTC.
  • Supports clock calibration mechanism to calibrate the clock drift from the 32768-HZ crystal oscillator in POWE RTC.
• CRC Module
  • Supports CRC8 Polynomial-0 = 0x1D.
  • Supports CRC8 Polynomial-1 = 0x07.
  • Supports CRC16 Polynomial-0 = 0x8005.
  • Supports CRC16 Polynomial-1 = 0x1021.
  • Supports CRC32 Polynomial-1 = 0x04C11DB7.
• Analog Peripherals
  • A 12-bit SAR ADC with 1M SPS and 16 analog inputs.
  • A 24-bit Delta Sigma ADC
  • A 6-bit Current DAC
  • A Low Noise Operational Amplifier
  • A Lamp Dedicated OP Amplifier
  • Temperature Sensor
  • Low Voltage Reset (2.0V, 2.6V, 3.0V, 4.0V)
  • Low Voltage Detector (2.4V, 2.9V, 3.4V, 4.4V)
• Voice Control
  • 12-bit PWM driver for driving buzzer directly.
•  LCD Driver
• • Supports 1/4 duty, 1/5 duty and 1.6 duty at 1/3 bias.
  • Supports 1/8 duty at 1/4 bias.
  • Supports R-Type, Internal Pump and External Pump.
• Security
  • 4 Security Levels are supported.
• Debug System
  • ARM Serial Wire Debug (SWD)
  • 4 Hardware Breakpoints
  • 2 Watch Points
• Operation Temperature
  • -40°C to 85°C
• Reliability
  • HBM 4KV
  • MM 400V
  • CDM 500V
• Package
  • QFN88, LQFP64